ispCP - Board - Support
ispCP 1.0.0 RC6 und proftp - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega International Area (/forum-22.html)
+--- Forum: German Corner (/forum-26.html)
+--- Thread: ispCP 1.0.0 RC6 und proftp (/thread-3998.html)

Pages: 1 2

ispCP 1.0.0 RC6 und proftp - neppumuck - 08-10-2008 07:04 AM

Hallo zusammen,
ich habe Ubuntu Server 7.10 (Gusty) mit ispCP 1.0.0 RC6 installiert. Habe dabei die Anleitung abgearbeitet. Jetzt viel mir auf, dass die von Benutzern angelegten FTP-Zugänge nicht funktionieren.

In die Mysql Tabelle ftp_users wird er eingetragen.
proftp.log meldet dazu:

Aug 09 22:48:35 xxx.xxxx.org proftpd[4983] xxx.xxxx.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): FTP session opened.
Aug 09 22:48:35 xxx.xxxx.org proftpd[4983] xxx.xxxx.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): mod_delay/0.5: delaying for 1 usecs
Aug 09 22:48:35 xxx.xxxx.org proftpd[4983] xxx.xxxx.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): no such user 'ftp@xxxxxxx.org.org'
Aug 09 22:48:35 xxx.xxxx.org proftpd[4983] xxx.xxxx.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): USER ftp@xxxxxxx.org.org: no such user found from ::ffff:192.168.1.123 [::ffff:192.168.1.123] to ::ffff:192.168.1.240:21
Aug 09 22:48:35 xxx.xxxx.org proftpd[4983] xxx.xxxx.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): FTP session closed.3] xxx.xxxx.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): FTP session closed.

Hier die proftp.conf:

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on

ServerName "Debian"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayFirstChdir .message
ListOptions "-l"

DenyFilter \*.*/

# Use this to jail all users in their homes
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd off

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

# Choose a SQL backend among MySQL or PostgreSQL.
# Both modules are loaded in default configuration, so you have to specify the backend
# or comment out the unused module in /etc/proftpd/modules.conf.
# Use 'mysql' or 'postgres' as possible values.
#
#<IfModule mod_sql.c>
# SQLBackend mysql
#</IfModule>

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_tls.c>
TLSEngine off
</IfModule>

<IfModule mod_quota.c>
QuotaEngine on
</IfModule>

<IfModule mod_ratio.c>
Ratios on
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine on
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayFirstChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>



Kann mir bitte jemand einen Rat geben?

LG

Alex

RE: ispCP 1.0.0 RC6 und proftp - Zothos - 08-10-2008 07:11 PM

bitte mal eine error log ohne xxxxx.

RE: ispCP 1.0.0 RC6 und proftp - Dexus - 08-10-2008 07:19 PM

ist es so gewollt? xxx.org.org?

RE: ispCP 1.0.0 RC6 und proftp - fulltilt - 08-10-2008 08:47 PM

Zothos Wrote:bitte mal eine error log ohne xxxxx.

Genau das Problem hatte ich vor einiger Zeit auch, ich kann zwar wieder einloggen aber der Login per net2ftp dauert fast 60 sec. - ausloggen dauert auch ewig.
Ich denke hier müsste dringend eine Anpassung im net2ftp (u. proftpd) erfolgen - das bekomme ich nach dem einloggen:

Code:
Ihr Auftrag wurde angehalten
Ihr Arbeitsauftrag den Sie mit net2ftp ausführen wollten, hat mehr Zeit als die erlaubten 30 Sekunden in Anspruch genommen, und wurde deswegen angehalten.
Diese Zeitbeschränkung gewährleistet den Betrieb des Webservers für andere Nutzer.
Versuchen Sie, Ihren Auftrag in kleinere Schritte aufzutrennen: schränken Sie die Auswahl an Dateien ein, und/oder überspringen sie die größten Dateien.

Ich habe das vorerst so lösen können:
http://www.isp-control.net/forum/erledigt-proftpd-fehler-t-3895-2.html#pid33588

RE: ispCP 1.0.0 RC6 und proftp - neppumuck - 08-10-2008 09:34 PM

Hallo nochmal,

danke erst mal für die Antworten. Hier ist der Auszug aus der proftp.log:

Aug 10 13:27:10 alx.zapto.org proftpd[5403] alx.zapto.org: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) standalone mode STARTUP
Aug 10 13:27:24 alx.zapto.org proftpd[5406] alx.zapto.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): FTP session opened.
Aug 10 13:27:24 alx.zapto.org proftpd[5406] alx.zapto.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): no such user 'ftp@alexmueller.org'
Aug 10 13:27:24 alx.zapto.org proftpd[5406] alx.zapto.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): USER ftp@alexmueller.org: no such user found from ::ffff:192.168.1.123 [::ffff:192.168.1.123] to ::ffff:192.168.1.240:21
Aug 10 13:27:24 alx.zapto.org proftpd[5406] alx.zapto.org (::ffff:192.168.1.123[::ffff:192.168.1.123]): FTP session closed.

Ich werde jetzt mal den Ansatz von fulltilt verfolgen und heute Abend berichten, wie es gelaufen ist.
Danke schon mal vorab Smile
LG

Alex

Nachtrag: bekomme gerade die Meldung beim Start von Proftp:

Fatal: unknown configuration directive 'SQLBackend' on line 168 of '/etc/proftpd/proftpd.conf'

LG

RE: ispCP 1.0.0 RC6 und proftp - neppumuck - 08-11-2008 06:21 AM

Hallo nochmal,

ich habe jetzt folgendes gemacht:

beide confs proftpd und die in ispcp/proftpd
oben in die erste zeile:
AuthOrder mod_sql.c

# ispCP SQL Managment
AuthOrder mod_sql.c
SQLBackend mysql
SQLAuthTypes Crypt
SQLAuthenticate on
SQLConnectInfo ispcp@localhost vftp xxxxxxxxxxxxxxx
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000

und:

ach ja und in der modules.conf das postgres auskommentiert :-)

dann habe ich folgenden Eintrag aktiviert, um die Fehlermeldung ( letzter Beitrag unten ) abzuschalten:

#<IfModule mod_sql.c>
SQLBackend mysql
#</IfModule>

also hier nocheinmal die beiden konfs:

/etc/ispcp/proftpd:

AuthOrder mod_sql.c

# ispCP SQL Managment
AuthOrder mod_sql.c
SQLBackend mysql
SQLAuthTypes Crypt
SQLAuthenticate on
SQLConnectInfo ispcp@localhost vftp passwort
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000


#
# ispCP ω (OMEGA) a Virtual Hosting Control System
#
# @copyright 2001-2006 by moleSoftware GmbH
# @copyright 2006-2008 by ispCP | http://isp-control.net
# @version SVN: $ID$
# @link http://isp-control.net
# @author ispCP Team
#
# @license
# This program is free software; you can redistribute it and/or modify it under
# the terms of the MPL General Public License as published by the Free Software
# Foundation; either version 1.1 of the License, or (at your option) any later
# version.
# You should have received a copy of the MPL Mozilla Public License along with
# this program; if not, write to the Open Source Initiative (OSI)
# http://opensource.org | osi@opensource.org
#
################################################################################​
# Includes DSO modules (this is mandatory in proftpd 1.3)
#Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 off

ServerName "{HOST_NAME}"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

AllowOverwrite on
UseReverseDNS off
IdentLookups off
AllowStoreRestart on
AllowForeignAddress on

LogFormat traff "%b %u"

TimeoutLogin 120
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayFirstChdir message

ListOptions "-l"
#LsDefaultOptions "-l"

DenyFilter \*.*/

DefaultRoot ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
#PassivePorts 49152 65534

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User nobody
Group nogroup

# Normally, we want files to be overwriteable.
<Directory /*>
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on
HideNoAccess on
</Directory>

# But not to overwrite ispCP Standard directories.
<Directory ~/>
PathDenyFilter "^/(backups|cgi-bin|htdocs|errors|logs|phptmp|statistics)/?$"
</Directory>

<Limit ALL>
IgnoreHidden on
</Limit>

# Be warned: use of this directive impacts CPU average load!
#
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
# UseSendFile off

<Global>
RootLogin off
TransferLog /var/log/proftpd/xferlog
ExtendedLog /var/log/proftpd/ftp_traff.log read,write traff
PathDenyFilter "\.quota$"
</Global>

#
# SSL via TLS
#
#<IfModule mod_tls.c>
# TLSEngine off # on for use of TLS
# TLSLog /var/log/proftpd/ftp_ssl.log # where to log to
# TLSProtocol SSLv23 # SSLv23 or TLSv1
# TLSOptions NoCertRequest # either to request the certificate or not
# TLSRSACertificateFile /etc/proftpd/ssl.crt # SSL certfile
# TLSRSACertificateKeyFile /etc/proftpd/ssl.key # SSL keyfile
# TLSVerifyClient off # client verification
#</IfModule>

#
# ISPCP Quota management;
#
<IfModule mod_quota.c>
QuotaEngine on
QuotaShowQuotas on
QuotaDisplayUnits Mb

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

QuotaLock /var/run/proftpd/tally.lock
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
</IfModule>

<IfModule mod_ratio.c>
Ratios on
</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine on
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>


# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayFirstChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>


/etc/proftpd:

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on

ServerName "Debian"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayFirstChdir .message
ListOptions "-l"

DenyFilter \*.*/

# Use this to jail all users in their homes
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd off

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

# Choose a SQL backend among MySQL or PostgreSQL.
# Both modules are loaded in default configuration, so you have to specify the backend
# or comment out the unused module in /etc/proftpd/modules.conf.
# Use 'mysql' or 'postgres' as possible values.
#
#<IfModule mod_sql.c>
# SQLBackend mysql
#</IfModule>

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_tls.c>
TLSEngine off
</IfModule>

<IfModule mod_quota.c>
QuotaEngine on
</IfModule>

<IfModule mod_ratio.c>
Ratios on
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine on
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayFirstChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>


An den Fehlermeldungen hat sich nichts geändert.
Könntet Ihr mir bitte nocheinmal einen Tipp geben?

LG
Alex

RE: ispCP 1.0.0 RC6 und proftp - Killua - 08-11-2008 03:50 PM

wäre net irgendwie schlau IPv6 auszuschalten ??

Quote:# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on

ServerName "Debian"
...

oder liege ich da falsch ?

Edit:
Und versuch dich mal von Hand mit den Logindaten vftp und dem pw das in der conf steht in phpmyadmin (pma) einzuloggen - ob das geht.

MfG
Killua

RE: ispCP 1.0.0 RC6 und proftp - fulltilt - 08-11-2008 06:09 PM

Genau - Du musst IPv6 auf off stellen, mach danach mal ein killall proftpd - neu Proftpd starten ...

Sztyler Wrote:wäre net irgendwie schlau IPv6 auszuschalten ??

Quote:# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on

ServerName "Debian"
...

oder liege ich da falsch ?

Edit:
Und versuch dich mal von Hand mit den Logindaten vftp und dem pw das in der conf steht in phpmyadmin (pma) einzuloggen - ob das geht.

MfG
Sztyler


RE: ispCP 1.0.0 RC6 und proftp - gOOvER - 08-11-2008 06:42 PM

Das Problem gab's vor kurzen schon mal. mysql was dort nicht geladen. Das kann ich mir hier auch vorstellen.

RE: ispCP 1.0.0 RC6 und proftp - neppumuck - 08-11-2008 08:53 PM

Hallo zusammen,

herzlichen Dank an alle !!! Das Problem ist gelöst.

1. mysql wurde nicht geladen:
SQLBackend mysql war auskommentiert.

2. Musste ich in die /etc/ispcp/proftpd/proftpd.conf folgendes eintragen:
#<IfModule mod_sql.c>
SQLBackend mysql
SQLAuthTypes Crypt
SQLAuthenticate on
SQLConnectInfo ispcp@localhost vftp passwort
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000
#</IfModule>

3. IPV6 Abschalten
UseIPv6 off

Dann ging es :-)

Noch kurz eine Frage: Im Augenblick kann der FTP User bis hoch zur / alle Verzeichnisse einsehen. Wie kann ich das ändern?

Nochmals vielen Dank für die schnellen und sehr guten Hilfen!

LG

Alex