ispCP - Board - Support
[RESUELTO] Reenvio llega por duplicado - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega International Area (/forum-22.html)
+--- Forum: Spanish Corner (/forum-29.html)
+--- Thread: [RESUELTO] Reenvio llega por duplicado (/thread-14292.html)

Pages: 1 2


RE: Reenvio llega por duplicado - fedeagostini - 07-02-2011 12:28 AM

Creo que sí los añadí... Sólo por intuición. Pero el error persiste siempre que envío desde una cuenta que esté en el mismo servidor.
Quote:#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
-o cleanup_service_name=pre-cleanup
2525 inet n - - - - smtpd
-o cleanup_service_name=pre-cleanup
465 inet n - - - - smtpd
-o cleanup_service_name=pre-cleanup
#submission inet n - - - - smtpd
# -o smtpd_enforce_tls=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps inet n - - - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# For AOL-Accounts
587 inet n - - - - smtpd
-o smtpd_client_restrictions=permit_sasl_authenticated,reject_unauth_destination
-o cleanup_service_name=pre-cleanup
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
-o cleanup_service_name=pre-cleanup
cleanup unix n - - - 0 cleanup
-o mime_header_checks=
-o nested_header_checks=
-o body_checks=
-o header_checks=
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
# ====================================================================
# ispCP ω (OMEGA) a Virtual Hosting Control System
#
# @copyright 2001-2006 by moleSoftware GmbH
# @copyright 2006-2008 by ispCP | http://isp-control.net
# @version SVN: $Id$
# @link http://isp-control.net
# @author ispCP Team
# ====================================================================
# AMaViS => Antivir / Antispam
# See: http://www.ijs.si/software/amavisd/README.postfix.html
pre-cleanup unix n - n - 0 cleanup
-o virtual_alias_maps=

amavis unix - - n - 2 smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes
-o disable_dns_lookups=yes
-o max_use=20

localhost:10025 inet n - n - - smtpd
-o content_filter=
-o local_recipient_maps=
-o relay_recipient_maps=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o smtpd_override_options=no_address_mappings
-o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes

# ispCP autoresponder
ispcp-arpl unix - n n - - pipe
flags=O user=vmail argv=/var/www/ispcp/engine/messager/ispcp-arpl-msgr

# TLS - Activate, if TLS is avaiable/used
smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}



RE: Reenvio llega por duplicado - kilburn - 07-02-2011 06:21 PM

Quote:
Code:
# TLS - Activate, if TLS is avaiable/used
smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes

Te falta meterselo a este (estabas mandando con tls cuando hacías las pruebas?).

Por otro lado, asumo que los espacios que faltan enfrente de las lineas "-o ...." son debidos al copy-paste pero existen en el fichero, no?


RE: Reenvio llega por duplicado - fedeagostini - 07-04-2011 10:48 PM

Tal cual!!! Pruebo y te aviso!
PERFECTOOOOOO!!!!!!!!
Muchísimas gracias kilburn!!!!!
Ahora sí, tema cerrado!!!!
Abrazo!