ispCP - Board - Support
[Gelöst] Postfix - Main.cf && SMTP-Fehler - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega International Area (/forum-22.html)
+--- Forum: German Corner (/forum-26.html)
+---- Forum: Archiv (/forum-54.html)
+---- Thread: [Gelöst] Postfix - Main.cf && SMTP-Fehler (/thread-1733.html)

Pages: 1 2 3 4 5 6 7


RE: Postfix - Main.cf && SMTP-Fehler - Dexus - 11-08-2007 09:27 AM

ehm....

hast du eine SMTP auth erstellt?

Bei Thunderbird musst du nach dem Konto einrichten noch eine SMTP auth einrichten...

und dem Konto zuweisen...

habe mal 2 Bilder angehängt, damit du nicht nach dem Fehler suchen musst der bei dir liegt, und nicht am Server ;D


RE: Postfix - Main.cf && SMTP-Fehler - Nightshark - 11-08-2007 08:13 PM

@Dexus, ich würd nix im mail.log haben wenn ich das falsch eingestellt hätte Wink

@joximu, ja ich weiss, hab ich geändert aber funtzt immer noch ned Sad


RE: Postfix - Main.cf && SMTP-Fehler - joximu - 11-09-2007 09:22 AM

was kommt denn bei "telnet mailserver 587" und dann "ehlo localhost" (quit)?
Bei mir kommt

Code:
# telnet mail.domain.ch 587
Trying 123.45.67.89...
Connected to mail.domain.ch.
Escape character is '^]'.
220 mail.domain.ch ISPCP 1.0 Priamos Managed ESMTP 1.0.0 RC2 OMEGA
ehlo localhost
250-mail.domain.ch
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-AUTH CRAM-MD5 LOGIN PLAIN DIGEST-MD5 NTLM
250-AUTH=CRAM-MD5 LOGIN PLAIN DIGEST-MD5 NTLM
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
quit
221 2.0.0 Bye
Connection closed by foreign host.

Vielleicht wurde PLAIN in neueren ispcp-Versionen deaktiviert...???


RE: Postfix - Main.cf && SMTP-Fehler - BeNe - 11-09-2007 04:52 PM

Quote:Vielleicht wurde PLAIN in neueren ispcp-Versionen deaktiviert...???
Scheint so:
Code:
    smtpd_sasl_security_options  = noanonymous, noplaintext
--> http://www.isp-control.net/ispcp/browser/trunk/configs/postfix/main.cf#L88

Greez BeNe


RE: Postfix - Main.cf && SMTP-Fehler - Nightshark - 11-09-2007 05:52 PM

Quote:# telnet mail.domain.ch 587
Trying 85.114.141.136...
Connected to mail.domain.ch.
Escape character is '^]'.
220 domain.ch ISPCP 1.0 Priamos Managed ESMTP 1.0.0 RC2 OMEGA
ehlo localhost
250-domain.ch
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-AUTH LOGIN DIGEST-MD5 CRAM-MD5 PLAIN
250-AUTH=LOGIN DIGEST-MD5 CRAM-MD5 PLAIN
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
Connection closed by foreign host.

@BeNe: Meinst du ich soll mal die config da ausprobieren? Mich stört vor allem das mit dem database dingens "No secret in database"


RE: Postfix - Main.cf && SMTP-Fehler - joximu - 11-09-2007 08:00 PM

@Nightshark...

Liegt's vielleicht an einem chrooted postfix? zumindest einzelner Prozesse im chroot und dass dort keine gescheiten Dinge im /var/spool/postfix/etc/sasldb2 sind...?

sollte in der master.cf zu setzen sein...

Gruss J


RE: Postfix - Main.cf && SMTP-Fehler - Nightshark - 11-10-2007 05:39 AM

o.O ok... also nachdem ich die sachen da geändert hatte... hatte ich n problem, welches sich durch die Installation von postgrey beheben liess. Aber ich empfange trotzdem keine mails mehr :o

Und senden kann ich immer noch keine...

Gesammthaft bin ich also zurückgefallen weil früher wenigstens Webmail noch ging Sad


RE: Postfix - Main.cf && SMTP-Fehler - rbtux - 11-10-2007 06:35 AM

poste mal die master.cf


RE: Postfix - Main.cf && SMTP-Fehler - Nightshark - 11-10-2007 07:28 AM

Die is aber gross... naja, ich hoffe mal es hilft
Code:
#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd
#submission inet n       -       -       -       -       smtpd
#  -o smtpd_enforce_tls=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps     inet  n       -       -       -       -       smtpd
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# For AOL-Accounts
587       inet  n       -       -       -       -       smtpd
   -o smtpd_client_restrictions=permit_sasl_authenticated,reject_unauth_destinat
ion
#628      inet  n       -       -       -       -       qmqpd
pickup    fifo  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      fifo  n       -       -       300     1       qmgr
#qmgr     fifo  n       -       -       300     1       oqmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
smtp      unix  -       -       -       -       -       smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       -       -       -       smtp
        -o fallback_relay=
#   -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache
# ====================================================================
# ISPCP Ï OMEGA configuration
# ====================================================================
# AMaViS => Antivir / Antispam
amavis    unix  -       -       n       -       2       smtp
   -o smtp_data_done_timeout=1200
   -o smtp_send_xforward_command=yes
   -o disable_dns_lookups=yes

localhost:10025 inet  n -       n       -      -        smtpd
   -o content_filter=
   -o local_recipient_maps=
   -o relay_recipient_maps=
   -o smtpd_restriction_classes=
   -o smtpd_client_restrictions=
   -o smtpd_helo_restrictions=
   -o smtpd_sender_restrictions=
   -o smtpd_recipient_restrictions=permit_mynetworks,reject
   -o smtpd_override_options=no_address_mappings
   -o mynetworks=127.0.0.0/8
   -o strict_rfc821_envelopes=yes

# ISPCP autoresponder
ispcp-arpl unix  -      n       n       -       -       pipe
  flags=O user=vmail argv=/var/www/ispcp/engine/messager/ispcp-arpl-msgr

# TSL - Activate, if TSL is avaiable/used
smtps     inet  n       -       -       -       -       smtpd
   -o smtpd_tls_wrappermode=yes
   -o smtpd_sasl_auth_enable=yes
#   -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
old-cyrus unix  -       n       n       -       -       pipe
  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
cyrus     unix  -       n       n       -       -       pipe
  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient



RE: Postfix - Main.cf && SMTP-Fehler - rbtux - 11-10-2007 07:31 AM

mach mal in die 5. spalte jeweils ein n...