+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega International Area (/forum-22.html)
+--- Forum: German Corner (/forum-26.html)
+---- Forum: Archiv (/forum-54.html)
+---- Thread: [ERLEDIGT]Probleme mit E-Mail (/thread-6012.html)
RE: Probleme mit E-Mail - PCMichi - 03-16-2009 01:55 AM
Hallo,
dass stand in der mail.warn:
Mar 15 16:43:29 pcmichi postfix/smtp[2436]: warning: no MX host for gmx.de has a valid address record
Mar 15 16:43:29 pcmichi postfix/smtp[2437]: warning: no MX host for gmx.de has a valid address record
Mar 15 16:43:29 pcmichi postfix/qmgr[2407]: warning: connect to transport retry: Connection refused
Mar 15 16:43:29 pcmichi postfix/qmgr[2407]: warning: connect to transport retry: Connection refused
Mar 15 16:53:24 pcmichi postfix/policyd-weight[3075]: warning: ignoring garbage: start
Mar 15 16:53:25 pcmichi postfix/policyd-weight[3075]: warning: Got SIGINT. Daemon terminated.
Mar 15 16:53:30 pcmichi postfix/policyd-weight[3077]: warning: err: init: master: bind 12525: IO::Socket::INET: Die Adresse wird bereits verwendet Die Adresse wird bereits verw$
Kann mir da keiner helfen??
mfg
PCMichi
RE: Probleme mit E-Mail - joximu - 03-16-2009 07:26 AM
auf Kommandozeile des Servers eingeben:
Code:
lsof -i -P -Twenn das auftaucht:
policyd-w 2442 polw 4u IPv4 6259 TCP localhost:12525
dann läuft der daemon.
Du kannst ihn auch stoppen und starten
Code:
/etc/init.d/policyd-weight stop
/etc/init.d/policyd-weight startGruss J
RE: Probleme mit E-Mail - PCMichi - 03-16-2009 07:39 AM
(03-16-2009 07:26 AM)joximu Wrote: auf Kommandozeile des Servers eingeben:
Code:
lsof -i -P -T
wenn das auftaucht:
policyd-w 2442 polw 4u IPv4 6259 TCP localhost:12525
dann läuft der daemon.
Du kannst ihn auch stoppen und starten
(auch in der Shell einzugeben...)Code:
/etc/init.d/policyd-weight stop
/etc/init.d/policyd-weight start
Gruss J
Hallo,
also bei mir steht folgendes:
policyd-w 2223 polw 3u IPv4 5777 UDP pcmichi.homelinux.com:38751->fritz.fonwlan.box:53
policyd-w 2223 polw 4u IPv4 5778 TCP pcmichi.homelinux.com.local:12525
mfg
PCMichi
EDIT:
Habe noch folgende Zeilen gefunden:
policyd-w 3106 polw 3u IPv4 12484 UDP pcmichi.homelinux.com:52139->fritz.fonwlan.box:53
policyd-w 3106 polw 4u IPv4 5778 TCP pcmichi.homelinux.com.local:12525
RE: Probleme mit E-Mail - joximu - 03-16-2009 08:16 AM
Hallo PCMichi
also, der Dienst läuft (nachdem du ihn wohl neugestartet hast, bekam er ne neue PID - und offenbar macht er auch Gebrauch vom DNS...) - insofern müsste geprüft werden, ob ggf. postfix Probleme hat, ihn zu kontaktieren.
Kannst du "postconf -n" mal eingeben und die Ausgabe posten - und ggf. die /etc/postfix/master.cf ebenfalls...
/J
RE: Probleme mit E-Mail - PCMichi - 03-16-2009 08:26 AM
Hallo,
dass werde ich morgen machen.
mfg
PCMichi
RE: Probleme mit E-Mail - PCMichi - 03-16-2009 11:26 PM
Hallo,
hier die postconf -n Ausgabe:
pcmichi:~# postconf -n
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_at_myorigin = yes
append_dot_mydomain = no
biff = no
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
inet_interfaces = all
local_destination_recipient_limit = 1
local_recipient_maps = unix:passwd.byname $alias_database
local_transport = local
mail_spool_directory = /var/mail
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
message_size_limit = 0
mydestination = $myhostname, $mydomain
mydomain = pcmichi.homelinux.com
myhostname = mail.pcmichi.homelinux.com
mynetworks_style = subnet
myorigin = $myhostname
recipient_delimiter = +
setgid_group = postdrop
smtpd_banner = $myhostname ESMTP ispCP 1.0.0 OMEGA Managed
smtpd_data_restrictions = reject_multi_recipient_bounce, reject_unauth_pipelining
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_mynetworks, permi t_sasl_authenticated, reject_invalid_helo_hostname , reject_non_fqdn_helo_hostname
smtpd_recipient_restrictions = reject_non_fqdn_recipient, reject_unknown_recipient_domain, permit_my networks, permit_sasl_authenticated, reject_unauth_destination, reject _unlisted_recipient, check_policy_service inet:127 .0.0.1:12525, check_policy_service inet:127.0.0.1: 60000, permit
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
smtpd_sender_restrictions = reject_non_fqdn_sender, reject_unknown_sender_domain, permit_mynetworks, permit_sasl_authenticated
transport_maps = hash:/etc/postfix/ispcp/transport
virtual_alias_maps = hash:/etc/postfix/ispcp/aliases
virtual_gid_maps = static:8
virtual_mailbox_base = /var/mail/virtual
virtual_mailbox_domains = hash:/etc/postfix/ispcp/domains
virtual_mailbox_limit = 0
virtual_mailbox_maps = hash:/etc/postfix/ispcp/mailboxes
virtual_minimum_uid = 1001
virtual_transport = virtual
virtual_uid_maps = static:1001
Und hier die master.cf:
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
#submission inet n - - - - smtpd
# -o smtpd_enforce_tls=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps inet n - - - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# For AOL-Accounts
587 inet n - - - - smtpd
-o smtpd_client_restrictions=permit_sasl_authenticated,reject_unauth_destination
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
# ====================================================================
# ispCP Ï^É (OMEGA) a Virtual Hosting Control System
#
# @copyright 2001-2006 by moleSoftware GmbH
# @copyright 2006-2008 by ispCP | http://isp-control.net
# @version SVN: $Id$
# @link http://isp-control.net
# @author ispCP Team
# ====================================================================
# AMaViS => Antivir / Antispam
amavis unix - - n - 2 smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes
-o disable_dns_lookups=yes
localhost:10025 inet n - n - - smtpd
-o content_filter=
-o local_recipient_maps=
-o relay_recipient_maps=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o smtpd_override_options=no_address_mappings
-o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes
# ispCP autoresponder
ispcp-arpl unix - n n - - pipe
flags=O user=vmail argv=/var/www/ispcp/engine/messager/ispcp-arpl-msgr
# TLS - Activate, if TLS is avaiable/used
smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
mfg
PCMichi
RE: Probleme mit E-Mail - joximu - 03-17-2009 06:48 AM
Sind die zwei ispcp default (abgesehen von den amavis)?
Ich würde sagen, mal testen, ob das ohne policyd-weight normal läuft - dann wissen wir wo weitersuchen :-)
diese zwei Zeilen mal im main.cf anpassen:
Code:
smtpd_helo_restrictions =
permit_mynetworks,
permit_sasl_authenticated,
reject_invalid_helo_hostname,
reject_non_fqdn_helo_hostname
smtpd_recipient_restrictions =
reject_non_fqdn_recipient,
reject_unknown_recipient_domain,
permit_mynetworks,
permit_sasl_authenticated,
reject_unauth_destination,
reject_unlisted_recipient,
check_policy_service inet:127.0.0.1:60000,
permit
# die Zeile merken wir uns für später:
# check_policy_service inet:127.0.0.1:12525,Ich nehme an, die Abständ in deinem Posting waren nicht gewollt
(zB. "check_policy_service inet:127 .0.0.1:12525")
Versuchs mal so - speichern, postfix neustarten und sehen, ob nun keine Probleme mehr auftauchen.
Wenn wir soweit sicher sein können, dann ist klar: Fokussierung auf policyd-weight<->postfix.
Gruss J
RE: Probleme mit E-Mail - PCMichi - 03-17-2009 07:11 AM
Hallo,
also ich hab das jetzt geändert,
postfix gestoppt, dann gestartet.
dann habe ich eine e-mail an xxxxx@pcmichi.homelinux.com geschickt.
In der mail.log steht nun folgendes:
Mar 16 22:05:57 pcmichi postfix/smtpd[3141]: connect from mail.gmx.net[213.165.64.20]
Mar 16 22:05:57 pcmichi postfix/trivial-rewrite[3143]: warning: do not list domain pcmichi.homelinux.com in BOTH mydestinatination and virtual_mailbox_domains
RE: Probleme mit E-Mail - rbtux - 03-17-2009 07:13 AM
und das problem findest du in der dokumentation
RE: Probleme mit E-Mail - PCMichi - 03-17-2009 08:03 AM
wenn ich jetzt eine e-mail sende, bringt er folgende Zeile:
Mar 16 22:59:49 pcmichi postfix/smtp[4037]: 2368A2129AF: lost connection with mx0.gmx.de[213.165.64.100] while receiving the initial server greeting
Wie behebe ich das??
mfg
PCMichi