ispCP - Board - Support
Ftp login problems - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega Support Area (/forum-30.html)
+--- Forum: System Setup & Installation (/forum-32.html)
+--- Thread: Ftp login problems (/thread-6254.html)

Pages: 1 2


RE: Ftp login problems - dirckx - 04-01-2009 06:29 AM

ok did make a new proftpd.conf

Code:
#
# ispCP ω (OMEGA) a Virtual Hosting Control System
#
# @copyright    2001-2006 by moleSoftware GmbH
# @copyright    2006-2009 by ispCP | http://isp-control.net
# @version        SVN: $Id$
# @link            http://isp-control.net
# @author        ispCP Team
#
# @license
#   This program is free software; you can redistribute it and/or modify it under
#   the terms of the MPL General Public License as published by the Free Software
#   Foundation; either version 1.1 of the License, or (at your option) any later
#   version.
#   You should have received a copy of the MPL Mozilla Public License along with
#   this program; if not, write to the Open Source Initiative (OSI)
#   http://opensource.org | osi@opensource.org
#
################################################################################​
# Includes DSO modules (this is mandatory in proftpd 1.3)
#Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6                    off

ServerName                 "-= NemesiS =-"
ServerType                 standalone
DeferWelcome               off

MultilineRFC2228           on
DefaultServer              on
ShowSymlinks               on

AllowOverwrite             on
UseReverseDNS              off
IdentLookups               off
AllowStoreRestart          on
AllowForeignAddress        on

LogFormat                  traff "%b %u"

TimeoutLogin               120
TimeoutNoTransfer          600
TimeoutStalled             600
TimeoutIdle                1200

DisplayLogin               welcome.msg
DisplayFirstChdir          message

ListOptions                "-l"
#LsDefaultOptions           "-l"

DenyFilter                 \*.*/

DefaultRoot                ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd         off

# Port 21 is the standard FTP port.
Port                       21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
#PassivePorts               49152 65534

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances               30

# Set the user and group that the server normally runs at.
User                       nobody
Group                      nogroup

# Normally, we want files to be overwriteable.

<Directory /*>
  # Umask 022 is a good standard umask to prevent new files and dirs
  # (second parm) from being group and world writable.
  Umask                    022  022
  # Normally, we want files to be overwriteable.
  AllowOverwrite           on
  HideNoAccess             on
</Directory>

<Limit ALL>
  IgnoreHidden             on
</Limit>

# Be warned: use of this directive impacts CPU average load!
#
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
# UseSendFile               off

<Global>
  RootLogin                off
  TransferLog              /var/log/proftpd/xferlog
  ExtendedLog              /var/log/proftpd/ftp_traff.log read,write traff
  PathDenyFilter           "\.quota$"
</Global>

#
# SSL via TLS
#
#<IfModule mod_tls.c>
#  TLSEngine                off                           # on for use of TLS
#  TLSLog                   /var/log/proftpd/ftp_ssl.log  # where to log to
#  TLSProtocol              SSLv23                        # SSLv23 or TLSv1
#  TLSOptions               NoCertRequest                 # either to request the certificate or not
#  TLSRSACertificateFile    /etc/proftpd/ssl.crt          # SSL certfile
#  TLSRSACertificateKeyFile /etc/proftpd/ssl.key          # SSL keyfile
#  TLSVerifyClient          off                           # client verification
#</IfModule>

#
# ISPCP Quota management;
#
<IfModule mod_quotatab.c>
  QuotaEngine              on
  QuotaShowQuotas          on
  QuotaDisplayUnits        Mb

  SQLNamedQuery            get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
  SQLNamedQuery            get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
  SQLNamedQuery            update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
  SQLNamedQuery            insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

  QuotaLock                /var/run/proftpd/tally.lock
  QuotaLimitTable          sql:/get-quota-limit
  QuotaTallyTable          sql:/get-quota-tally/update-quota-tally/insert-quota-tally
</IfModule>

<IfModule mod_ratio.c>
  Ratios                   on
</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
  DelayEngine              on
</IfModule>

<IfModule mod_ctrls.c>
  ControlsEngine           on
  ControlsMaxClients       2
  ControlsLog              /var/log/proftpd/controls.log
  ControlsInterval         5
  ControlsSocket           /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
  AdminControlsEngine      on
</IfModule>

# ispCP SQL Managment
# Activate for proftpd >= 1.3
#SQLBackend                mysql
SQLAuthTypes               Crypt
SQLAuthenticate            on
SQLConnectInfo             ispcp@localhost vftp mypassword
SQLUserInfo                ftp_users userid passwd uid gid homedir shell
SQLGroupInfo               ftp_group groupname gid members
SQLMinUserUID              2000
SQLMinUserGID              2000

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
#   User                   ftp
#   Group                  nogroup
#   # We want clients to be able to login with "anonymous" as well as "ftp"
#   UserAlias              anonymous ftp
#   # Cosmetic changes, all files belongs to ftp user
#   DirFakeUser            on ftp
#   DirFakeGroup           on ftp
#
#   RequireValidShell      off
#
#   # Limit the maximum number of anonymous logins
#   MaxClients             10
#
#   # We want 'welcome.msg' displayed at login, and '.message' displayed
#   # in each newly chdired directory.
#   DisplayLogin           welcome.msg
#   DisplayFirstChdir      .message
#
#   # Limit WRITE everywhere in the anonymous chroot
#   <Directory *>
#     <Limit WRITE>
#       DenyAll
#     </Limit>
#   </Directory>
#
#   # Uncomment this if you're brave.
#   # <Directory incoming>
#   #   # Umask 022 is a good standard umask to prevent new files and dirs
#   #   # (second parm) from being group and world writable.
#   #   Umask              022  022
#   #   <Limit READ WRITE>
#   #     DenyAll
#   #   </Limit>
#   #   <Limit STOR>
#   #     AllowAll
#   #   </Limit>
#   # </Directory>
#
# </Anonymous>
Include /etc/proftpd/ispcp/*
(remember its Ubunto 8.10)

and i get a error on debug
Code:
- disabling runtime support for IPv6 connections
- warning: the DisplayFirstChdir directive is deprecated and will be removed in a future release.  Please use the DisplayChdir directive.
- DenyFilter: compiling deny regex '\*.*/'
- <Directory /*>: deferring resolution of path
- PathDenyFilter: compiling deny regex '.quota$'
- <IfModule>: skipping 'mod_quotatab.c' section at line 124
- <IfModule>: skipping 'mod_ratio.c' section at line 139
- <IfModule>: using 'mod_delay.c' section at line 146
- <IfModule>: using 'mod_ctrls.c' section at line 150
- <IfModule>: skipping 'mod_ctrls_admin.c' section at line 158
- Fatal: unknown configuration directive 'SQLAuthTypes' on line 165 of '/etc/proftpd/proftpd.conf'

seen loads of those things in the german parts of the forum but cant read wat to do with it
please help with it i did reinstall now 10x the server i realy dont know what is wrong


RE: Ftp login problems - dirckx - 04-04-2009 05:40 AM

Please has some one a solution for this problem?


RE: Ftp login problems - dirckx - 04-04-2009 05:58 PM

ok think there is no solution for this its not a real problem

i can do it the other way i can use the ftp with the original settings of ubuntu.
but where do i need to upload the files to the new created web site i have now only a dir within /var/www/virtual/ with the domain name but cant enter if i try to enter it says 550 : No such file or directory.


RE: Ftp login problems - Lucan - 04-04-2009 07:17 PM

Try

#SQLBackend mysql

changing to

SQLBackend mysql



I'm not sure if it works, but i think i've read something like this before.


RE: Ftp login problems - dirckx - 04-04-2009 09:11 PM

(04-04-2009 07:17 PM)Lucan Wrote:  Try

#SQLBackend mysql

changing to

SQLBackend mysql



I'm not sure if it works, but i think i've read something like this before.

no did not work did try it before


RE: Ftp login problems - Lucan - 04-04-2009 09:49 PM

Ok, here my thoughts:

find
Code:
ServerName                 "-= NemesiS =-"
change to
Code:
ServerName                 "admin.yourdomain.com"
(or the fully qualified hostname you entered while installing ispcp)

find
Code:
#SQLBackend                mysql
change to
Code:
SQLBackend                mysql

Try now if it works, if not do the following:


Find:
Code:
<Global>
  RootLogin                off
  TransferLog              /var/log/proftpd/xferlog
  ExtendedLog              /var/log/proftpd/ftp_traff.log read,write traff
  PathDenyFilter           "\.quota$"
</Global>
add after:
Code:
# Loading required modules
<IfModule !mod_sql.c>
  LoadModule mod_sql.c
</IfModule>
<IfModule !mod_sql_mysql.c>
  LoadModule mod_sql_mysql.c
</IfModule>
<IfModule !mod_quotatab.c>
  LoadModule mod_quotatab.c
</IfModule>
<IfModule !mod_quotatab_sql.c>
  LoadModule mod_quotatab_sql.c
</IfModule>


And of cause don't forget to set your password

Quote:SQLConnectInfo ispcp@localhost vftp yourpassword




Tell me if it works



Greetings