[ERLEDIGT] Probleme mit dem FTP Server

Code:

#

# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.

# To really apply changes reload proftpd after modifications.

# 



# Includes DSO modules

Include /etc/proftpd/modules.conf



# Set off to disable IPv6 support which is annoying on IPv4 only boxes.

UseIPv6                on

# If set on you can experience a longer connection delay in many cases.

IdentLookups            off



ServerName            "Debian"

ServerType            standalone

DeferWelcome            off



MultilineRFC2228        on

DefaultServer            on

ShowSymlinks            on



TimeoutNoTransfer        600

TimeoutStalled            600

TimeoutIdle            1200



DisplayLogin                    welcome.msg

DisplayChdir                   .message true

ListOptions                    "-l"



DenyFilter            \*.*/



# Use this to jail all users in their homes 

# DefaultRoot            ~



# Users require a valid shell listed in /etc/shells to login.

# Use this directive to release that constrain.

# RequireValidShell        off



# Port 21 is the standard FTP port.

Port                21



# In some cases you have to specify passive ports range to by-pass

# firewall limitations. Ephemeral ports can be used for that, but

# feel free to use a more narrow range.

# PassivePorts                  49152 65534



# If your host was NATted, this option is useful in order to

# allow passive tranfers to work. You have to use your public

# address and opening the passive ports used on your firewall as well.

# MasqueradeAddress        1.2.3.4



# This is useful for masquerading address with dynamic IPs:

# refresh any configured MasqueradeAddress directives every 8 hours

<IfModule mod_dynmasq.c>

# DynMasqRefresh 28800

</IfModule>



# To prevent DoS attacks, set the maximum number of child processes

# to 30.  If you need to allow more than 30 concurrent connections

# at once, simply increase this value.  Note that this ONLY works

# in standalone mode, in inetd mode you should use an inetd server

# that allows you to limit maximum number of processes per service

# (such as xinetd)

MaxInstances            30



# Set the user and group that the server normally runs at.

User                proftpd

Group                nogroup



# Umask 022 is a good standard umask to prevent new files and dirs

# (second parm) from being group and world writable.

Umask                022  022

# Normally, we want files to be overwriteable.

AllowOverwrite            on



# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:

# PersistentPasswd        off



# This is required to use both PAM-based authentication and local passwords

# AuthOrder            mod_auth_pam.c* mod_auth_unix.c



# Be warned: use of this directive impacts CPU average load!

# Uncomment this if you like to see progress and transfer rate with ftpwho

# in downloads. That is not needed for uploads rates.

#

# UseSendFile            off



TransferLog /var/log/proftpd/xferlog

SystemLog   /var/log/proftpd/proftpd.log



<IfModule mod_quotatab.c>

QuotaEngine off

</IfModule>



<IfModule mod_ratio.c>

Ratios off

</IfModule>





# Delay engine reduces impact of the so-called Timing Attack described in

# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02

# It is on by default. 

<IfModule mod_delay.c>

DelayEngine on

</IfModule>



<IfModule mod_ctrls.c>

ControlsEngine        off

ControlsMaxClients    2

ControlsLog           /var/log/proftpd/controls.log

ControlsInterval      5

ControlsSocket        /var/run/proftpd/proftpd.sock

</IfModule>



<IfModule mod_ctrls_admin.c>

AdminControlsEngine off

</IfModule>



#

# Alternative authentication frameworks

#

#Include /etc/proftpd/ldap.conf

#Include /etc/proftpd/sql.conf



#

# This is used for FTPS connections

#

#Include /etc/proftpd/tls.conf



# A basic anonymous configuration, no upload directories.



# <Anonymous ~ftp>

#   User                ftp

#   Group                nogroup

#   # We want clients to be able to login with "anonymous" as well as "ftp"

#   UserAlias            anonymous ftp

#   # Cosmetic changes, all files belongs to ftp user

#   DirFakeUser    on ftp

#   DirFakeGroup on ftp

# 

#   RequireValidShell        off

# 

#   # Limit the maximum number of anonymous logins

#   MaxClients            10

# 

#   # We want 'welcome.msg' displayed at login, and '.message' displayed

#   # in each newly chdired directory.

#   DisplayLogin            welcome.msg

#   DisplayChdir        .message

# 

#   # Limit WRITE everywhere in the anonymous chroot

#   <Directory *>

#     <Limit WRITE>

#       DenyAll

#     </Limit>

#   </Directory>

# 

#   # Uncomment this if you're brave.

#   # <Directory incoming>

#   #   # Umask 022 is a good standard umask to prevent new files and dirs

#   #   # (second parm) from being group and world writable.

#   #   Umask                022  022

#   #            <Limit READ WRITE>

#   #            DenyAll

#   #            </Limit>

#   #            <Limit STOR>

#   #            AllowAll

#   #            </Limit>

#   # </Directory>

# 

# </Anonymous>

Code:

# 

# ispCP ω (OMEGA) a Virtual Hosting Control System 

# 

# @copyright    2001-2006 by moleSoftware GmbH 

# @copyright    2006-2009 by ispCP | http://isp-control.net 

# @version              SVN: $Id$ 

# @link                 http://isp-control.net 

# @author               ispCP Team 

# 

# @license 

#   This program is free software; you can redistribute it and/or modify it under 

#   the terms of the MPL General Public License as published by the Free Software 

#   Foundation; either version 1.1 of the License, or (at your option) any later 

#   version. 

#   You should have received a copy of the MPL Mozilla Public License along with 

#   this program; if not, write to the Open Source Initiative (OSI) 

#   http://opensource.org | osi@opensource.org 

# 

################################################################################ 

# Includes DSO modules (this is mandatory in proftpd 1.3) 

#Include /etc/proftpd/modules.conf 

  

# Set off to disable IPv6 support which is annoying on IPv4 only boxes. 

UseIPv6                    off 

  

ServerName                 "{HOST_NAME}" 

ServerType                 standalone 

DeferWelcome               off 

  

MultilineRFC2228           on 

DefaultServer              on 

ShowSymlinks               on 

 

AllowOverwrite             on 

UseReverseDNS              off 

IdentLookups               off 

AllowStoreRestart          on 

AllowForeignAddress        on 

  

LogFormat                  traff "%b %u" 

 

TimeoutLogin               120 

TimeoutNoTransfer          600 

TimeoutStalled             600 

TimeoutIdle                1200 

  

DisplayLogin               welcome.msg 

DisplayFirstChdir          message 

  

ListOptions                "-l" 

#LsDefaultOptions           "-l" 

  

DenyFilter                 \*.*/ 

  

DefaultRoot                ~ 

  

Uncomment this if you are using NIS or LDAP to retrieve passwords: 

PersistentPasswd         off 

  

Port 21 is the standard FTP port. 

Port                       21 

  

In some cases you have to specify passive ports range to by-pass 

firewall limitations. Ephemeral ports can be used for that, but 

feel free to use a more narrow range. 

PassivePorts               49152 65534 

  

To prevent DoS attacks, set the maximum number of child processes 

to 30.  If you need to allow more than 30 concurrent connections 

at once, simply increase this value.  Note that this ONLY works 

in standalone mode, in inetd mode you should use an inetd server 

that allows you to limit maximum number of processes per service 

(such as xinetd) 

MaxInstances               30 

  

Set the user and group that the server normally runs at. 

User                       nobody 

Group                      nogroup 

  

Normally, we want files to be overwriteable. 

<Directory /*> 

Umask 022 is a good standard umask to prevent new files and dirs 

(second parm) from being group and world writable. 

Umask                    022  022 

# Normally, we want files to be overwriteable. 

AllowOverwrite           on 

HideNoAccess             on 

</Directory> 

  

<Limit ALL> 

  IgnoreHidden             on 

</Limit> 

  

# Be warned: use of this directive impacts CPU average load! 

# 

# Uncomment this if you like to see progress and transfer rate with ftpwho 

# in downloads. That is not needed for uploads rates. 

# UseSendFile               off 

  

<Global> 

RootLogin                off 

   TransferLog              /var/log/proftpd/xferlog 

   ExtendedLog              /var/log/proftpd/ftp_traff.log read,write traff 

   PathDenyFilter           "\.quota$" 

</Global> 

  

# 

# SSL via TLS 

# 

#<IfModule mod_tls.c> 

#  TLSEngine                off                           # on for use of TLS 

#  TLSLog                   /var/log/proftpd/ftp_ssl.log  # where to log to 

#  TLSProtocol              SSLv23                        # SSLv23 or TLSv1 

#  TLSOptions               NoCertRequest                 # either to request the certificate or not 

#  TLSRSACertificateFile    /etc/proftpd/ssl.crt          # SSL certfile 

#  TLSRSACertificateKeyFile /etc/proftpd/ssl.key          # SSL keyfile 

#  TLSVerifyClient          off                           # client verification 

#</IfModule> 

  

# 

# ISPCP Quota management; 

# 

 <IfModule mod_quotatab.c> 

   QuotaEngine              on 

   QuotaShowQuotas          on 

   QuotaDisplayUnits        Mb 

  

   SQLNamedQuery            get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'" 

   SQLNamedQuery            get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'" 

   SQLNamedQuery            update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies 

   SQLNamedQuery            insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies 

  

   QuotaLock                /var/run/proftpd/tally.lock 

   QuotaLimitTable          sql:/get-quota-limit 

   QuotaTallyTable          sql:/get-quota-tally/update-quota-tally/insert-quota-tally 

 </IfModule> 

  

 <IfModule mod_ratio.c> 

   Ratios                   on 

 </IfModule> 

  

# Delay engine reduces impact of the so-called Timing Attack described in 

# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02 

# It is on by default. 

<IfModule mod_delay.c> 

   DelayEngine              on 

</IfModule> 

  

<IfModule mod_ctrls.c> 

   ControlsEngine           on 

   ControlsMaxClients       2 

   ControlsLog              /var/log/proftpd/controls.log 

   ControlsInterval         5 

   ControlsSocket           /var/run/proftpd/proftpd.sock 

 </IfModule> 

  

 <IfModule mod_ctrls_admin.c> 

   AdminControlsEngine      on 

 </IfModule> 

  

# ispCP SQL Managment 

 AuthOrder                  mod_sql.c mod_sql_mysql.c 

# Activate for proftpd >= 1.3 

#SQLBackend                 mysql 

SQLAuthTypes               Crypt 

SQLAuthenticate            on 

SQLConnectInfo             {DATABASE_NAME}@{DATABASE_HOST} {DATABASE_USER} {DATABASE_PASS} 

SQLUserInfo                ftp_users userid passwd uid gid homedir shell 

SQLGroupInfo               ftp_group groupname gid members 

SQLMinUserUID              {FTPD_MIN_UID} 

SQLMinUserGID              {FTPD_MIN_GID} 

 

# A basic anonymous configuration, no upload directories. 

  

# <Anonymous ~ftp> 

#   User                   ftp 

#   Group                  nogroup 

#   # We want clients to be able to login with "anonymous" as well as "ftp" 

#   UserAlias              anonymous ftp 

#   # Cosmetic changes, all files belongs to ftp user 

#   DirFakeUser            on ftp 

#   DirFakeGroup           on ftp 

# 

#   RequireValidShell      off 

# 

#   # Limit the maximum number of anonymous logins 

#   MaxClients             10 

# 

#   # We want 'welcome.msg' displayed at login, and '.message' displayed 

#   # in each newly chdired directory. 

#   DisplayLogin           welcome.msg 

#   DisplayFirstChdir      .message 

# 

#   # Limit WRITE everywhere in the anonymous chroot 

#   <Directory *> 

#     <Limit WRITE> 

#       DenyAll 

#     </Limit> 

#   </Directory> 

# 

#   # Uncomment this if you're brave. 

#   # <Directory incoming> 

#   #   # Umask 022 is a good standard umask to prevent new files and dirs 

#   #   # (second parm) from being group and world writable. 

#   #   Umask              022  022 

#   #   <Limit READ WRITE> 

#   #     DenyAll 

#   #   </Limit> 

#   #   <Limit STOR> 

#   #     AllowAll 

#   #   </Limit> 

#   # </Directory> 

# 

# </Anonymous> 

Include /etc/proftpd/ispcp/*