+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega Support Area (/forum-30.html)
+--- Forum: Update/Upgrade (/forum-44.html)
+--- Thread: Upgrading from 1.0.7: ispCP Apache main vhost file: Failed (/thread-12524.html)
Upgrading from 1.0.7: ispCP Apache main vhost file: Failed - I am new here - 12-26-2010 02:09 AM
Hi, I followed exactly the steps as described here: http://isp-control.net/documentation/start/upgrade/debian
But it gets stucked at:
* ispCP Apache main vhost file: [ Failed ]
[FATAL] An error occurred during update process!
Correct it and re-run this program.
Don't really know what to do now
Thanks in Advance,
Tom
RE: Upgrading from 1.0.7: ispCP Apache main vhost file: Failed - racom - 12-26-2010 07:52 AM
Oh hai Tom, I'm new here too.
Quote:* ispCP Apache main vhost file: [ Failed ]
[FATAL] An error occurred during update process!
Correct it and re-run this program.
Don't really know what to do now
I could be wrong since I'm doing this on FreeBSD, but hey.
What are the last lines of
Code:
cat /var/log/ispcp/setup/ispcp-setup.logAnd can you figure something out on this?
Like for example, I had a stop at setup when I did not have courier installed. Looked like:
#sys_command() | [ERROR] External command '/usr/local/sbin/makeuserdb' exited with value -1 !
...then I installed courier and passed this stage.
i.e. look at this thread:
http://isp-control.net/forum/thread-12462.html
Good Luck
racom
RE: Upgrading from 1.0.7: ispCP Apache main vhost file: Failed - I am new here - 12-26-2010 07:53 PM
Thanks for your reply, that are the last lines of ispcp-update.log:
Code:
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -pf /etc/ispcp/apache/working/ispcp.conf /etc/apache2/sites-available/') | Ending...
sys_command() | Starting...
system() | [DEBUG] Module cgid already enabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2enmod cgid') | Ending...
sys_command() | Starting...
system() | [DEBUG] Module rewrite already enabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2enmod rewrite') | Ending...
sys_command() | Starting...
system() | [DEBUG] Module suexec already enabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2enmod suexec') | Ending...
sys_command() | Starting...
system() | [DEBUG] ERROR: Site ispcp.conf not properly enabled: /etc/apache2/sites-enabled/ispcp.conf is a real file, not touching it
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 1
getCmdExitValue() | Ending...exit_msg() | Starting...
exit_msg() | Ending...
del_file() | Starting...
del_file() | Ending...
[/code]
And dome other lines:
Code:
getCmdExitValue() | [DEBUG] External command exited with value 0
system() | [DEBUG] ERROR: Module php4 does not exist!
ERROR: Module php5 does not exist!
getCmdExitValue() | [DEBUG] External command exited with value 1
getCmdExitValue() | Ending...
sys_command() | [ERROR] External command '/usr/sbin/a2dismod php4 php5' exited with value 1 !
sys_command() | Starting...
system() | [DEBUG] Module actions already enabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2enmod actions') | Ending...
sys_command() | Starting...
system() | [DEBUG] Module fastcgi_ispcp already disabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2dismod fastcgi_ispcp') | Ending...
sys_command() | Starting...
system() | [DEBUG] Module fcgid_ispcp already enabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2enmod fcgid_ispcp') | Ending...
sys_command() | Starting...
system() | [DEBUG] Module fastcgi already disabled
Module fcgid already disabled
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2dismod fastcgi fcgid') | Ending...
setup_php() | Ending...
setup_httpd_main_vhost() | Starting...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0Better to post the whole file?
Thanks for your help,
Tom
RE: Upgrading from 1.0.7: ispCP Apache main vhost file: Failed - nuno - 01-23-2011 02:15 AM
Hi, I have the same problem related to php4 and php5 mod, for months that I can't upgrade my ispcp, which is very sad, and nobody seems to want to answer, I have to think about whether I will continue with ispCP or not. There should be commercial support for some Urgent situations.
http://isp-control.net/forum/thread-12730.html
http://isp-control.net/forum/thread-12633.html
RE: Upgrading from 1.0.7: ispCP Apache main vhost file: Failed - I am new here - 02-21-2011 05:21 AM
Hi,
Now I completely reset (installed Debian again) the Server and installed ispCP again and it shows some Errors:
* ispCP Apache fastCGI modules configuration: [ Failed ]
System: Debian 64bit Vserver
newest ispcp version 1.0.7
LOG:
Code:
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
prep_tpl() | Ending...
store_file() | Starting...
setfmode() | Starting...
setfmode() | Ending...
store_file() | Ending...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -fp /etc/ispcp/cron.d/working/ispcp /etc/cron.d/') | Ending...
setup_crontab() | Ending...
setup_named() | Starting...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -p /etc/bind/named.conf /etc/ispcp/bind/backup/named.conf.system') | Ending...
get_file() | Starting...
get_file() | Ending...
get_file() | Starting...
get_file() | Ending...
store_file() | Starting...
setfmode() | Starting...
setfmode() | Ending...
store_file() | Ending...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -pf /etc/ispcp/bind/working/named.conf /etc/bind/named.conf') | Ending...
setup_named() | Ending...
setup_php() | Starting...
get_file() | Starting...
get_file() | Ending...
prep_tpl() | Starting...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
prep_tpl() | Ending...
store_file() | Starting...
setfmode() | Starting...
setfmode() | Ending...
store_file() | Ending...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -pf /etc/ispcp/apache/working/fastcgi_ispcp.conf /etc/apache2/mods-available/') | Ending...
get_file() | Starting...
get_file() | Ending...
prep_tpl() | Starting...
repl_var() | Starting...
repl_tag() | Starting...
get_tag() | Starting...
get_tag() | Ending...
repl_tag() | Ending...
repl_tag() | Starting...
get_tag() | Starting...
repl_var() | Ending...
prep_tpl() | Ending...
store_file() | Starting...
setfmode() | Starting...
setfmode() | Ending...
store_file() | Ending...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -pf /etc/ispcp/apache/working/fcgid_ispcp.conf /etc/apache2/mods-available/') | Ending...
get_file() | Starting...
get_file() | Ending...
store_file() | Starting...
setfmode() | Starting...
setfmode() | Ending...
store_file() | Ending...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/cp -pf /etc/ispcp/apache/working/fcgid_ispcp.load /etc/apache2/mods-available/') | Ending...
sys_command() | Starting...
system() | [DEBUG] ERROR: Module php4 does not exist!
ERROR: Module php5 does not exist!
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 1
getCmdExitValue() | Ending...
sys_command() | [ERROR] External command '/usr/sbin/a2dismod php4 php5' exited with value 1 !
sys_command() | Starting...
system() | [DEBUG] Enabling module actions.
Run '/etc/init.d/apache2 restart' to activate new configuration!
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/usr/sbin/a2enmod actions') | Ending...
sys_command() | Starting...
system() | [DEBUG] ERROR: Module fastcgi_ispcp does not exist!
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 1
getCmdExitValue() | Ending...
sys_command() | [ERROR] External command '/usr/sbin/a2dismod fastcgi_ispcp' exited with value 1 !
exit_msg() | Starting...
exit_msg() | Ending...Please, can anybody help me?
Thanks,
Tom
P.S. MAke a new Thread for that?