+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega International Area (/forum-22.html)
+--- Forum: German Corner (/forum-26.html)
+--- Thread: Start Fehler (/thread-14772.html)
Start Fehler - Max2896 - 07-14-2011 03:28 AM
Hi,
ich habe grade ispcp 1.0.4 deinstalliert und iscp 1.0.7 aufgespielt (auf debian) jetz am ende wenn ispcp starten will kommt folgende meldung:
Quote:Starting ispCP installation
* Stopping all services: ....... [ Done ]
Pre-installation tasks for Debian
*Postgreyconfiguration(Updatinglisteningport): [ Done ]
System checks
* Mysql server connection: [Failed]
[FATAL] An error occurred during setup process!
Correct it and re-run this program.
Log files are stored in /var/log/ispcp/setup
You can also find help at http://isp-control.net/forum
Was kann ich machen?
LG Max
RE: Start Fehler - joximu - 07-14-2011 08:04 AM
was steht in /var/log/ispcp/setup?
Was bisher da steht: da stimmt was nicht mit den Angaben zum MySQL oder der läuft nicht.
/J
RE: Start Fehler - Max2896 - 07-14-2011 08:38 AM
eingegebene daten müssten eig. soweit richtig sein,
in der einen ispcp-preinst-install.log steht folgendes:
[Postgrey configuration (Updating listening port):]
und in der ispcp-setup.log steht:
get_conf() | Starting...
get_file() | Starting...
get_file() | Ending...
setup_main_vars() | Starting...
setup_main_vars() | Ending...
get_conf() | Ending...
makepath() | Starting...
makepath() | [NOTICE] '/var/log/ispcp/setup' exists ! Setting its permissions...
setfmode() | Starting...
setfmode() | Ending...
makepath() | Ending...
setup_start_up() | Starting...
welcome_note() | Starting...
welcome_note() | Ending...
setup_start_up() | Ending...
setup_engine() | Starting...
user_dialog() | Starting...
ask_hostname() | Starting...
get_sys_hostname() | Starting...
getEthAddr() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
getEthAddr() | Ending...
get_sys_hostname() | Ending...
isValidHostname() | Starting...
isValidHostname() | Ending...
ask_hostname() | Ending...
ask_eth() | Starting...
getEthAddr() | Starting...
getEthAddr() | Ending...
ask_eth() | Ending...
ask_vhost() | Starting...
get_sys_hostname() | Starting...
get_sys_hostname() | Ending...
ask_vhost() | Ending...
ask_db_host() | Starting...
ask_db_host() | Ending...
ask_db_name() | Starting...
ask_db_name() | Ending...
ask_db_user() | Starting...
ask_db_user() | Ending...
ask_db_password() | Starting...
ask_db_password() | Ending...
ask_db_ftp_user() | Starting...
ask_db_ftp_user() | Ending...
ask_db_ftp_password() | Starting...
ask_db_ftp_password() | Ending...
ask_db_pma_user() | Starting...
ask_db_pma_user() | Ending...
ask_db_pma_password() | Starting...
ask_db_pma_password() | Ending...
ask_admin() | Starting...
ask_admin() | Ending...
ask_admin_password() | Starting...
ask_admin_password() | Ending...
ask_admin_email() | Starting...
isValidEmail() | Starting...
isValidEmailUser() | Starting...
isValidEmailUser() | Ending...
isValidEmailDomain() | Starting...
isValidHostname() | Starting...
isValidHostname() | Ending...
isValidEmailDomain() | Ending...
isValidEmail() | Ending...
ask_admin_email() | Ending...
ask_second_dns() | Starting...
ask_second_dns() | Ending...
ask_resolver() | Starting...
ask_resolver() | Ending...
ask_mysql_prefix() | Starting...
ask_mysql_prefix() | Ending...
ask_fastcgi() | Starting...
ask_fastcgi() | Ending...
ask_timezone() | Starting...
ask_timezone() | Ending...
ask_awstats_on() | Starting...
ask_awstats_on() | Ending...
user_dialog() | Ending...
stop_services() | Starting...
sys_command() | Starting...
system() | [DEBUG] Stopping ispCP Network Traffic Logger: ispcp_network
ispcp_network is already stopped (warning).
.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/ispcp_network stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping ispCP GUI-Backend communication Daemon: ispcp_daemon.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/ispcp_daemon stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping domain name service...: bind9rndc: connect failed: 127.0.0.1#953: connection refused
.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/bind9 stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping web server: apache2.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/apache2 stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping ftp server: proftpd.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/proftpd stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping policyd-weight (incl. cache): policyd-weight.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/policyd-weight stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping Postfix Mail Transport Agent: postfix.
sys_command('/etc/init.d/policyd-weight stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping Postfix Mail Transport Agent: postfix.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/postfix stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping Courier authentication services: authdaemond.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/courier-authdaemon stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping Courier POP3 server: pop3d.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/courier-pop stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping Courier IMAP server: imapd.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
sys_command('/etc/init.d/courier-pop stop') | Ending...
sys_command() | Starting...
system() | [DEBUG] Stopping Courier IMAP server: imapd.
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/etc/init.d/courier-imap stop') | Ending...
stop_services() | Ending...
preinst() | Starting...
sys_command() | Starting...
getCmdExitValue() | Starting...
getCmdExitValue() | [DEBUG] External command exited with value 0
getCmdExitValue() | Ending...
sys_command('/bin/sh preinst install') | Ending...
preinst() | Ending...
check_host_system() | Starting...
check_sql_connection() | Starting...
check_sql_connection() | Checking MySQL server connection with the following DSN: DBI:mysql::localhost root
doSQL() | Starting...
doSQL() | [ERROR] Unable to connect SQL server with current DSN: DBI:mysql::localhost root
exit_msg() | Starting...
exit_msg() | Ending...
del_file() | Starting...
del_file() | Ending...
so, das war die andre log
LG Max
RE: Start Fehler - joximu - 07-14-2011 08:57 AM
Das Probelm ist hier:
check_sql_connection() | Checking MySQL server connection with the following DSN: DBI:mysql::localhost root
doSQL() | Starting...
doSQL() | [ERROR] Unable to connect SQL server with current DSN: DBI:mysql::localhost root
Das setup kann mit den gegebenen Daten (Benutzer root - mehr sieht man nicht) die Datenbank nicht erreichen.
Warum steht nicht genauer....
/J
RE: Start Fehler - Max2896 - 07-14-2011 09:10 AM
hmm ich könnt höchstns nochmal des mysql root pw ändern vllt. gehts dann ...
probiert des setup über localhost den mysql server zu erreichen ja oder?
RE: Start Fehler - joximu - 07-14-2011 05:20 PM
ja, localhost - ist ja meistens localhost... und das wird auch gefragt...
Hast du mal probiert mit den angegebenen Daten auf mysql zu verbinden (localhost etcc...)
/J
RE: Start Fehler - Max2896 - 07-19-2011 11:30 PM
EDIT: hat sich erledigt es hat funktioniert trotsdem danke