postfix probleme (gleich 2 server) - obey - 07-09-2008 09:18 PM
hi,
ich hab gleich mal 2 postfix probleme:
1. geht es um einen centOS rhel5 server. nach der (ohnehin sehr schwierigen) installation von rc4 bekam ich im quirrelmail den fehler, dass eine mail nicht verschickt werden konnte, weil kein smtp laufen würde.
kurz gecheckt: port 25 war zu. postfix liess sich aber auch nicht starten.
in der main.cf habe ich dann das daemon_directory und das
program_directory auf /usr/libexec/postfix geändert. danach liess sich wenigstens der postfix starten.
wenn ich aber jetzt etwas aus dem webmail verschicken will, rödelt der ewig rum und kommt mir dann mit: message has not been sent. Ohne weitere Erklärung. Das error.log sagt folgendes:
Code:
[Wed Jul 09 09:57:20 2008] [error] [client 127.0.0.1] script not found or unable to stat: /usr/lib/cgi-bin, referer: http://admin1.interfrog.de/client/webtools.php
Hat da vll noch jemand eine idee was genau da zerschossen ist?
mein 2. prob:
auf einem debian etch server verlief die installation sehr viel problemloser als auf dem centOS. Hier funktioniert soweit alles, nur ein Problem tritt auf:
Wenn ich versuche über den mailclient (in diesem fall thunderbird) etwas zu schicken, wird mein passwort nicht angenommen. Überall sonst schon.
Im log stehen:
Code:
Jul 9 13:11:19 obey postfix/smtpd[7181]: warning: SASL authentication failure: no secret in database
Jul 9 13:11:19 obey postfix/smtpd[7181]: warning: u2-61.dsl.vianetworks.de[194.231.192.61]: SASL CRAM-MD5 authentication failed: authentication failure
Jul 9 13:11:19 obey postfix/smtpd[7181]: warning: SASL authentication failure: Password verification failed
Jul 9 13:11:19 obey postfix/smtpd[7181]: warning: u2-61.dsl.vianetworks.de[194.231.192.61]: SASL PLAIN authentication failed: authentication failure
Jul 9 13:11:19 obey postfix/smtpd[7181]: warning: u2-61.dsl.vianetworks.de[194.231.192.61]: SASL LOGIN authentication failed: authentication failure
Ich weiss, dass es hier im forum schon einige posts gibt, die das thema behandeln, allerdings hat keine der lösungen bei mir gegriffen.
vor allem das
Code:
authentication failure: no secret in database
gibt mir zu denken. Wenn ihr irgendwelche configs braucht, einfach bescheid geben.
wäre klasse wenn da noch jemand ne idee hätte
gruss obey!
RE: postfix probleme (gleich 2 server) - ZooL - 07-12-2008 05:19 AM
2. problem.. scheind irgendwo ein haken an der sasl problematic zu sein.. einfach mal
die confs checken... dies biete ich dir an auch zu tun..
mfg
RE: postfix probleme (gleich 2 server) - obey - 07-14-2008 08:22 PM
ok, danke ...
main.cf:
Code:
# Postfix directory settings; These are critical for normal Postfix MTA functionallity
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
program_directory = /usr/lib/postfix
# Some common configuration parameters
inet_interfaces = all
mynetworks_style = host
myhostname = admin1.bitclique.de
mydomain = $myhostname
myorigin = $myhostname
smtpd_banner = $myhostname ESMTP ispCP 1.0.0 RC4 OMEGA Managed
setgid_group = postdrop
# Receiving messages parameters
mydestination = $myhostname, $mydomain
append_dot_mydomain = no
append_at_myorigin = yes
local_transport = local
virtual_transport = virtual
transport_maps = hash:/etc/postfix/ispcp/transport
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
# Delivering local messages parameters
mail_spool_directory = /var/mail
# Mailboxquota
# => 0 for unlimited
# => 104857600 for 100 MB
mailbox_size_limit = 0
mailbox_command = procmail -a "$EXTENSION"
biff = no
recipient_delimiter = +
local_destination_recipient_limit = 1
local_recipient_maps = unix:passwd.byname $alias_database
# ispCP Autoresponder parameters
ispcp-arpl_destination_recipient_limit = 1
# Delivering virtual messages parameters
virtual_mailbox_base = /var/mail/virtual
virtual_mailbox_limit = 0
virtual_mailbox_domains = hash:/etc/postfix/ispcp/domains
virtual_mailbox_maps = hash:/etc/postfix/ispcp/mailboxes
virtual_alias_maps = hash:/etc/postfix/ispcp/aliases
virtual_minimum_uid = 1002
virtual_uid_maps = static:1002
virtual_gid_maps = static:8
# SASL paramters
smtpd_sasl_auth_enable = yes
smtpd_sasl2_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain =
broken_sasl_auth_clients = yes
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_mynetworks,
permit_sasl_authenticated,
reject_invalid_helo_hostname,
reject_non_fqdn_helo_hostname
smtpd_sender_restrictions = reject_non_fqdn_sender,
reject_unknown_sender_domain,
permit_mynetworks,
permit_sasl_authenticated
smtpd_recipient_restrictions = reject_non_fqdn_recipient,
reject_unknown_recipient_domain,
permit_mynetworks,
permit_sasl_authenticated,
reject_unauth_destination,
reject_unlisted_recipient,
check_policy_service inet:127.0.0.1:12525,
check_policy_service inet:127.0.0.1:60000,
permit
smtpd_data_restrictions = reject_multi_recipient_bounce,
reject_unauth_pipelining
# TLS parameters; activate, if avaible/used
#smtpd_use_tls = yes
#smtpd_tls_loglevel = 2
#smtpd_tls_cert_file = /etc/postfix/cert.pem
#smtpd_tls_key_file = /etc/postfix/privkey.pem
#smtpd_tls_auth_only = no
#smtpd_tls_received_header = yes
# AMaViS parameters; activate, if available/used
#content_filter = amavis:[127.0.0.1]:10024
# Quota support; activate, if available/used
#virtual_create_maildirsize = yes
#virtual_mailbox_extended = yes
#virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf
#virtual_mailbox_limit_override = yes
#virtual_maildir_limit_message = "The user you're trying to reach is over mailbox quota."
#virtual_overquota_bounce = yes
master.cf
Code:
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
#submission inet n - - - - smtpd
# -o smtpd_enforce_tls=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps inet n - - - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# For AOL-Accounts
587 inet n - - - - smtpd
-o smtpd_client_restrictions=permit_sasl_authenticated,reject_unauth_destination
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
# ====================================================================
# ispCP Ï (OMEGA) a Virtual Hosting Control System
#
# @copyright 2001-2006 by moleSoftware GmbH
# @copyright 2006-2008 by ispCP | http://isp-control.net
# @version SVN: $ID$
# @link http://isp-control.net
# @author ispCP Team
# ====================================================================
# AMaViS => Antivir / Antispam
amavis unix - - n - 2 smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes
-o disable_dns_lookups=yes
localhost:10025 inet n - n - - smtpd
-o content_filter=
-o local_recipient_maps=
-o relay_recipient_maps=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o smtpd_override_options=no_address_mappings
-o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes
# ispCP autoresponder
ispcp-arpl unix - n n - - pipe
flags=O user=vmail argv=/var/www/ispcp/engine/messager/ispcp-arpl-msgr
# TLS - Activate, if TLS is avaiable/used
smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
sasl/smtpd.conf
Code:
smtp_tls_session_cache_databaseeck_method: auxprop
auxprop_plugin: sql
mech_list: plain login cram-md5 digest-md5
sql_engine: mysql
sql_hostnames: localhost
sql_user: root
sql_passwd: xxxxxx
sql_database: ispcp
sql_select: select password from mail_users where email='%u@%r' = btree:${queue_directory}/smtp_scache
der user steht absichtlich auf root, da stand vorher als sql_user vhcs, was imho nicht wirklich stimmen kann
|