proftpd problem -> Please help

proftpd problem -> Please help - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega Development Area (/forum-1.html)
+--- Forum: General discussion (/forum-11.html)
+--- Thread: proftpd problem -> Please help (/thread-5085.html)

Pages: 1 2

proftpd problem -> Please help - hosting-zone - 12-07-2008 05:45 AM

Hello all, i have ubuntu 8.04 and i installed ISPCP Omega. Everything is perfect but i have problem with my ftp server. When i login the result in all time is: Wrong username or password. Can you help me to fix this problem because my users can't login in server.

RE: proftpd problem -> Please help - sci2tech - 12-07-2008 05:50 AM

(12-07-2008 05:45 AM)hosting-zone Wrote: Hello all, i have ubuntu 8.04 and i installed ISPCP Omega. Everything is perfect but i have problem with my ftp server. When i login the result in all time is: Wrong username or password. Can you help me to fix this problem because my users can't login in server.

This problem was discussed over and over again. Please search forum and provide informations needed to help you ( ISPCP version, proftpd.conf, output of proftpd -n -d5). Nobody can guess whats wrong without more info.
HINT You do not have proper configuration (proftpd.conf), proftpd-mysql is not installed or is not enabled (see modules.conf).

RE: proftpd problem -> Please help - hosting-zone - 12-07-2008 06:01 AM

where is modules.conf ?

RE: proftpd problem -> Please help - sci2tech - 12-07-2008 06:09 AM

(12-07-2008 06:01 AM)hosting-zone Wrote: where is modules.conf ?

/etc/proftpd/modules.conf

RE: proftpd problem -> Please help - hosting-zone - 12-07-2008 06:10 AM

is not installed. how i can installed it ?

RE: proftpd problem -> Please help - sci2tech - 12-07-2008 06:19 AM

Maybe is not needed. Please put here proftd.conf (delete password for sql connect)
also try

Code:

apt-get install proftpd-mysql

RE: proftpd problem -> Please help - hosting-zone - 12-07-2008 06:21 AM

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on

ServerName "Debian"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter \*.*/

# Use this to jail all users in their homes
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder *mod_auth_pam.c mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

# Choose a SQL backend among MySQL or PostgreSQL.
# Both modules are loaded in default configuration, so you have to specify the backend
# or comment out the unused module in /etc/proftpd/modules.conf.
# Use 'mysql' or 'postgres' as possible values.
#
#<IfModule mod_sql.c>
# SQLBackend mysql
#</IfModule>

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayFirstChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>

RE: proftpd problem -> Please help - sci2tech - 12-07-2008 06:25 AM

This is not proftpd.conf generated by ispcp. You replace it during update maybe. See in /etc/ispcp/proftpd/backup is exist one file named proftpd.conf.ispcp. if yes try replace proftpd.conf with this file.

RE: proftpd problem -> Please help - hosting-zone - 12-07-2008 06:30 AM

#
# ispCP П‰ (OMEGA) a Virtual Hosting Control System
#
# @copyright 2001-2006 by moleSoftware GmbH
# @copyright 2006-2008 by ispCP | http://isp-control.net
# @version SVN: $ID$
# @link http://isp-control.net
# @author ispCP Team
#
# @license
# This program is free software; you can redistribute it and/or modify it under
# the terms of the MPL General Public License as published by the Free Software
# Foundation; either version 1.1 of the License, or (at your option) any later
# version.
# You should have received a copy of the MPL Mozilla Public License along with
# this program; if not, write to the Open Source Initiative (OSI)
# http://opensource.org | osi@opensource.org
#
################################################################################
# Includes DSO modules (this is mandatory in proftpd 1.3)
#Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 off

ServerName "{HOST_NAME}"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

AllowOverwrite on
UseReverseDNS off
IdentLookups off
AllowStoreRestart on
AllowForeignAddress on

LogFormat traff "%b %u"

TimeoutLogin 120
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayFirstChdir message

ListOptions "-l"
#LsDefaultOptions "-l"

DenyFilter \*.*/

DefaultRoot ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
#PassivePorts 49152 65534

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User nobody
Group nogroup

# Normally, we want files to be overwriteable.
<Directory /*>
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on
HideNoAccess on
</Directory>

# But not to overwrite ispCP Standard directories.
<Directory ~/>
PathDenyFilter "^/(backups|cgi-bin|htdocs|errors|logs|phptmp|statistics)/?$"
</Directory>

<Limit ALL>
IgnoreHidden on
</Limit>

# Be warned: use of this directive impacts CPU average load!
#
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
# UseSendFile off

<Global>
RootLogin off
TransferLog /var/log/proftpd/xferlog
ExtendedLog /var/log/proftpd/ftp_traff.log read,write traff
PathDenyFilter "\.quota$"
</Global>

#
# SSL via TLS
#
#<IfModule mod_tls.c>
# TLSEngine off # on for use of TLS
# TLSLog /var/log/proftpd/ftp_ssl.log # where to log to
# TLSProtocol SSLv23 # SSLv23 or TLSv1
# TLSOptions NoCertRequest # either to request the certificate or not
# TLSRSACertificateFile /etc/proftpd/ssl.crt # SSL certfile
# TLSRSACertificateKeyFile /etc/proftpd/ssl.key # SSL keyfile
# TLSVerifyClient off # client verification
#</IfModule>

#
# ISPCP Quota management;
#
<IfModule mod_quota.c>
QuotaEngine on
QuotaShowQuotas on
QuotaDisplayUnits Mb

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

QuotaLock /var/run/proftpd/tally.lock
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
</IfModule>

<IfModule mod_ratio.c>
Ratios on
</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine on
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>

# ispCP SQL Managment
# Activate for proftpd >= 1.3
#SQLBackend mysql
SQLAuthTypes Crypt
SQLAuthenticate on
SQLConnectInfo {DATABASE_NAME}@{DATABASE_HOST} {DATABASE_USER} {DATABASE_PASS}
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinUserUID {FTPD_MIN_UID}
SQLMinUserGID {FTPD_MIN_GID}

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayFirstChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
is this config ?

RE: proftpd problem -> Please help - sci2tech - 12-07-2008 06:40 AM

Does not look good.
You must replace in this file
{HOST_NAME} with Debian
<IfModule mod_quota.c> with <IfModule mod_quotatab.c>

{FTPD_MIN_UID} with 2000
{FTPD_MIN_GID} with 2000

{DATABASE_NAME} with ispcp database usual ispcp
{DATABASE_HOST} usual localhost
{DATABASE_USER} user that have acces to ftp_group, ftp_users, quotalimits, quotatallies tables with specific privileges: SELECT, INSERT, UPDATE, DELETE. this user is created during setup and suggested is vftp
{DATABASE_PASS} password for the user