![]() |
Can't receive emails. - Printable Version +- ispCP - Board - Support (http://www.isp-control.net/forum) +-- Forum: ispCP Omega Support Area (/forum-30.html) +--- Forum: System Setup & Installation (/forum-32.html) +--- Thread: Can't receive emails. (/thread-6074.html) |
Can't receive emails. - rikki_max - 03-15-2009 01:30 PM Hello I can send emails to remote destinations but I cannot receive emails. mail.log error: Mar 15 16:17:00 host postfix/smtpd[22929]: connect from web36703.mail.mud.yahoo.com[209.191.85.37] Mar 15 16:17:02 host postfix/smtpd[22929]: 26F063FA923: client=web36703.mail.mud.yahoo.com[209.191.85.37] Mar 15 16:17:02 host postfix/cleanup[22932]: 26F063FA923: message-id=<744518.56437.qm@web36703.mail.mud.yahoo.com> Mar 15 16:17:02 host postfix/qmgr[21886]: 26F063FA923: from=<rikki_max@yahoo.com>, size=4058, nrcpt=1 (queue active) Mar 15 16:17:02 host postfix/trivial-rewrite[22937]: warning: do not list domain rikkimaxfbc.compress.to in BOTH mydestination and virtual_mailbox_domains Mar 15 16:17:02 host postfix/local[22938]: 26F063FA923: to=<rikki@rikkimaxfbc.compress.to>, relay=local, delay=1.5, delays=1.5/0.01/0/0.01, dsn=5.1.1, status=bounced (unknown user: "rikki") Mar 15 16:17:02 host postfix/cleanup[22932]: EA9CB3FA925: message-id=<20090315031702.EA9CB3FA925@rikkimaxfbc.compress.to> Mar 15 16:17:02 host postfix/bounce[22939]: 26F063FA923: sender non-delivery notification: EA9CB3FA925 Mar 15 16:17:02 host postfix/qmgr[21886]: EA9CB3FA925: from=<>, size=5903, nrcpt=1 (queue active) Mar 15 16:17:02 host postfix/qmgr[21886]: 26F063FA923: removed Mar 15 16:17:03 host postfix/smtpd[22929]: disconnect from web36703.mail.mud.yahoo.com[209.191.85.37] postfix main.cf: # # ispCP ω (OMEGA) a Virtual Hosting Control System # # @copyright 2001-2006 by moleSoftware GmbH # @copyright 2006-2008 by ispCP | http://isp-control.net # @version SVN: $Id$ # @link http://isp-control.net # @author ispCP Team # # @license # This program is free software; you can redistribute it and/or modify it under # the terms of the MPL General Public License as published by the Free Software # Foundation; either version 1.1 of the License, or (at your option) any later # version. # You should have received a copy of the MPL Mozilla Public License along with # this program; if not, write to the Open Source Initiative (OSI) # http://opensource.org | osi@opensource.org # ################################################################################ # Postfix directory settings; These are critical for normal Postfix MTA functionallity command_directory = /usr/sbin daemon_directory = /usr/lib/postfix # Some common configuration parameters inet_interfaces = all mynetworks_style = host myhostname = rikkimaxfbc.compress.to mydomain = rikkimaxfbc.compress.to myorigin = $myhostname smtpd_banner = $myhostname ESMTP ispCP 1.0.0 OMEGA Managed setgid_group = postdrop # Receiving messages parameters mydestination = $myhostname, $mydomain append_dot_mydomain = no append_at_myorigin = yes local_transport = local virtual_transport = virtual transport_maps = hash:/etc/postfix/ispcp/transport alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases # Delivering local messages parameters mail_spool_directory = /var/mail # Mailboxquota # => 0 for unlimited # => 104857600 for 100 MB mailbox_size_limit = 0 mailbox_command = procmail -a "$EXTENSION" # Message size limit # => 0 for unlimited # => 104857600 for 100 MB message_size_limit = 0 biff = no recipient_delimiter = + local_destination_recipient_limit = 1 local_recipient_maps = unix:passwd.byname $alias_database # ispCP Autoresponder parameters ispcp-arpl_destination_recipient_limit = 1 # Delivering virtual messages parameters virtual_mailbox_base = /var/mail/virtual virtual_mailbox_limit = 0 virtual_mailbox_domains = hash:/etc/postfix/ispcp/domains virtual_mailbox_maps = hash:/etc/postfix/ispcp/mailboxes virtual_alias_maps = hash:/etc/postfix/ispcp/aliases virtual_minimum_uid = 1001 virtual_uid_maps = static:1001 virtual_gid_maps = static:8 # SASL paramters smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = broken_sasl_auth_clients = yes smtpd_helo_restrictions = permit_mynetworks permit_sasl_authenticated reject_invalid_helo_hostname reject_non_fqdn_helo_hostname smtpd_sender_restrictions = reject_non_fqdn_sender reject_unknown_sender_domain permit_mynetworks permit_sasl_authenticated smtpd_recipient_restrictions = reject_non_fqdn_recipient reject_unknown_recipient_domain permit_mynetworks permit_sasl_authenticated reject_unlisted_recipient permit_inet_interfaces permit_mx_backup check_relay_domains smtpd_data_restrictions = reject_multi_recipient_bounce, reject_unauth_pipelining # TLS parameters; activate, if avaible/used #smtpd_use_tls = yes #smtpd_tls_loglevel = 2 #smtpd_tls_cert_file = /etc/postfix/cert.pem #smtpd_tls_key_file = /etc/postfix/privkey.pem #smtpd_tls_auth_only = no #smtpd_tls_received_header = yes # AMaViS parameters; activate, if available/used #content_filter = amavis:[127.0.0.1]:10024 # Quota support; activate, if available/used #virtual_create_maildirsize = yes #virtual_mailbox_extended = yes #virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf #virtual_mailbox_limit_override = yes #virtual_maildir_limit_message = "The user you're trying to reach is over mailbox quota." #virtual_overquota_bounce = yes allow_untrusted_routing = yes Any ideas? Thanks rikki. I have done some tests and it seems that it is not mapping the users so e.g. rikki@rikkimaxfbc.compress.to does not exist but yet in ispcp it does. So I may have figured out why but on the other hand I dont feel like learning out how ispcp does everything to fix it. RE: Can't receive emails. - rikki_max - 03-15-2009 02:39 PM I have done another test and it so far seems that rikkimaxfbc.compress.to as off being the default domain is not being able to be mapped to! SOLVED it was simple. Becouse I couldn't use the domain rikkimaxfbc.compress.to as it was the default in all the config. I deleted it and made another site which users a different domain BUT it users a alias for the domain so it works! That worked but only for web sites. Thinking about a creating a subdomain to go by and swapping domains. Didn't need to. In webmin I created a master zone but the server is the other domain fbc.mefound.com so in a way it was simply forwarding everything. But unfortunately it isn't using the users just the unix ones so im gonna do some alias changing. So it is SOLVED partly |