FTP Login geht nicht! - Printable Version

FTP Login geht nicht! - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega International Area (/forum-22.html)
+--- Forum: German Corner (/forum-26.html)
+--- Thread: FTP Login geht nicht! (/thread-6411.html)

FTP Login geht nicht! - tobi4711 - 04-15-2009 10:48 PM

Hallo,

ich habe ispCP auf meinen neuen Rootserver installiert alles wunderbar. Habe mir einen Account angelegt und versuche mich mit IP: sponsor-blog.de Benutzername: tobias@sponsor-blog.de Passwort: meinpw einzuloggen und es kommt:

Debian 5.0 ispCP version aus dem TuT

Code:

Status:    Auflösen der IP-Adresse für sponsor-blog.de

Status:    Verbinde mit 87.98.245.138:21...

Status:    Verbindung hergestellt, warte auf Willkommensnachricht...

Antwort:    220 ProFTPD 1.3.1 Server (Debian) [87.98.245.138]

Befehl:    USER tobias@sponsor-blog.de

Antwort:    331 Password required for tobias@sponsor-blog.de

Befehl:    PASS *************

Antwort:    530 Login incorrect.

Fehler:    Herstellen der Verbindung zum Server fehlgeschlagen

Mein Passwort ist nicht falsch habe es schon geändert aber geht nicht!

Außerdem kommt bei Ornder auswahl bei FTP folgendes:
Can not open directory !
Please contact your administrator !

RE: FTP Login geht nicht! - Lucan - 04-15-2009 11:00 PM

Poste mal deine proftp.conf

Und ggf. Log Einträge

RE: FTP Login geht nicht! - tobi4711 - 04-15-2009 11:04 PM

Code:

#

# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.

# To really apply changes reload proftpd after modifications.

# 

# Includes DSO modules

Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.

UseIPv6                on

# If set on you can experience a longer connection delay in many cases.

IdentLookups            off

ServerName            "Debian"

ServerType            standalone

DeferWelcome            off

MultilineRFC2228        on

DefaultServer            on

ShowSymlinks            on

TimeoutNoTransfer        600

TimeoutStalled            600

TimeoutIdle            1200

DisplayLogin                    welcome.msg

DisplayChdir                   .message true

ListOptions                    "-l"

DenyFilter            \*.*/

# Use this to jail all users in their homes 

# DefaultRoot            ~

# Users require a valid shell listed in /etc/shells to login.

# Use this directive to release that constrain.

# RequireValidShell        off

# Port 21 is the standard FTP port.

Port                21

# In some cases you have to specify passive ports range to by-pass

# firewall limitations. Ephemeral ports can be used for that, but

# feel free to use a more narrow range.

# PassivePorts                  49152 65534

# If your host was NATted, this option is useful in order to

# allow passive tranfers to work. You have to use your public

# address and opening the passive ports used on your firewall as well.

# MasqueradeAddress        1.2.3.4

# This is useful for masquerading address with dynamic IPs:

# refresh any configured MasqueradeAddress directives every 8 hours

<IfModule mod_dynmasq.c>

# DynMasqRefresh 28800

</IfModule>

# To prevent DoS attacks, set the maximum number of child processes

# to 30.  If you need to allow more than 30 concurrent connections

# at once, simply increase this value.  Note that this ONLY works

# in standalone mode, in inetd mode you should use an inetd server

# that allows you to limit maximum number of processes per service

# (such as xinetd)

MaxInstances            30

# Set the user and group that the server normally runs at.

User                proftpd

Group                nogroup

# Umask 022 is a good standard umask to prevent new files and dirs

# (second parm) from being group and world writable.

Umask                022  022

# Normally, we want files to be overwriteable.

AllowOverwrite            on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:

# PersistentPasswd        off

# This is required to use both PAM-based authentication and local passwords

# AuthOrder            mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!

# Uncomment this if you like to see progress and transfer rate with ftpwho

# in downloads. That is not needed for uploads rates.

#

# UseSendFile            off

TransferLog /var/log/proftpd/xferlog

SystemLog   /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>

QuotaEngine off

</IfModule>

<IfModule mod_ratio.c>

Ratios off

</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in

# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02

# It is on by default. 

<IfModule mod_delay.c>

DelayEngine on

</IfModule>

<IfModule mod_ctrls.c>

ControlsEngine        off

ControlsMaxClients    2

ControlsLog           /var/log/proftpd/controls.log

ControlsInterval      5

ControlsSocket        /var/run/proftpd/proftpd.sock

</IfModule>

<IfModule mod_ctrls_admin.c>

AdminControlsEngine off

</IfModule>

#

# Alternative authentication frameworks

#

#Include /etc/proftpd/ldap.conf

#Include /etc/proftpd/sql.conf

#

# This is used for FTPS connections

#

#Include /etc/proftpd/tls.conf

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>

#   User                ftp

#   Group                nogroup

#   # We want clients to be able to login with "anonymous" as well as "ftp"

#   UserAlias            anonymous ftp

#   # Cosmetic changes, all files belongs to ftp user

#   DirFakeUser    on ftp

#   DirFakeGroup on ftp

# 

#   RequireValidShell        off

# 

#   # Limit the maximum number of anonymous logins

#   MaxClients            10

# 

#   # We want 'welcome.msg' displayed at login, and '.message' displayed

#   # in each newly chdired directory.

#   DisplayLogin            welcome.msg

#   DisplayChdir        .message

# 

#   # Limit WRITE everywhere in the anonymous chroot

#   <Directory *>

#     <Limit WRITE>

#       DenyAll

#     </Limit>

#   </Directory>

# 

#   # Uncomment this if you're brave.

#   # <Directory incoming>

#   #   # Umask 022 is a good standard umask to prevent new files and dirs

#   #   # (second parm) from being group and world writable.

#   #   Umask                022  022

#   #            <Limit READ WRITE>

#   #            DenyAll

#   #            </Limit>

#   #            <Limit STOR>

#   #            AllowAll

#   #            </Limit>

#   # </Directory>

# 

# </Anonymous>

RE: FTP Login geht nicht! - TheCry - 04-15-2009 11:18 PM

Schau mal ob in /etc/ eine proftpd.conf liegt. Die muss natürlich nach /etc/proftpd verschoben werden.
Anschließend noch einmal in die Datei schauen ob

Code:

Include /etc/proftpd/modules.conf

vorhanden ist...
Wenn nicht eintragen und auf jeden Fall Proftpd neu starten.

RE: FTP Login geht nicht! - tobi4711 - 04-15-2009 11:21 PM

habe die config von /etc kopiert und in /etc/proftpd kopiert Proftpd neustarten aber es kommt:

ks26756:~# /etc/init.d/proftpd restart Stopping ftp server: proftpd.
Starting ftp server: proftpd - warning: the DisplayFirstChdir directive is deprecated and will be removed in a future release. Please use the DisplayChdir directive.
- Fatal: unknown configuration directive 'SQLAuthTypes' on line 164 of '/etc/proftpd/proftpd.conf'
failed!
ks26756:~#

RE: FTP Login geht nicht! - Lucan - 04-15-2009 11:22 PM

Die Config ist falsch.

Versuch die hier:

Code:

#

# ispCP ω (OMEGA) a Virtual Hosting Control System

#

# @copyright    2001-2006 by moleSoftware GmbH

# @copyright    2006-2008 by ispCP | http://isp-control.net

# @version              SVN: $Id$

# @link                 http://isp-control.net

# @author               ispCP Team

#

# @license

#   This program is free software; you can redistribute it and/or modify it under

#   the terms of the MPL General Public License as published by the Free Software

#   Foundation; either version 1.1 of the License, or (at your option) any later

#   version.

#   You should have received a copy of the MPL Mozilla Public License along with

#   this program; if not, write to the Open Source Initiative (OSI)

#   http://opensource.org | osi@opensource.org

#

################################################################################​​

# Includes DSO modules (this is mandatory in proftpd 1.3)

Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.

#UseIPv6                    off

ServerName                 "87-98-245-138.kimsufi.com"

ServerType                 standalone

DeferWelcome               off

MultilineRFC2228           on

DefaultServer              on

ShowSymlinks               on

DefaultAddress             87.98.245.138

AllowOverwrite             on

UseReverseDNS              off

IdentLookups               off

AllowStoreRestart          on

AllowForeignAddress        on

LogFormat                  traff "%b %u"

TimeoutLogin               120

TimeoutNoTransfer          600

TimeoutStalled             600

TimeoutIdle                1200

DisplayLogin               welcome.msg

#DisplayChdir          message

ListOptions                "-l"

#LsDefaultOptions           "-l"

DenyFilter                 \*.*/

DefaultRoot                ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:

# PersistentPasswd         off

# Port 21 is the standard FTP port.

Port                       21

# In some cases you have to specify passive ports range to by-pass

# firewall limitations. Ephemeral ports can be used for that, but

# feel free to use a more narrow range.

#PassivePorts               49152 65534

# To prevent DoS attacks, set the maximum number of child processes

# to 30.  If you need to allow more than 30 concurrent connections

# at once, simply increase this value.  Note that this ONLY works

# in standalone mode, in inetd mode you should use an inetd server

# that allows you to limit maximum number of processes per service

# (such as xinetd)

MaxInstances               30

# Set the user and group that the server normally runs at.

User                       nobody

Group                      nogroup

# Normally, we want files to be overwriteable.

<Directory /*>

  # Umask 022 is a good standard umask to prevent new files and dirs

  # (second parm) from being group and world writable.

  Umask                    022  022

  # Normally, we want files to be overwriteable.

  AllowOverwrite           on

  HideNoAccess             on

</Directory>

<Limit ALL>

  IgnoreHidden             on

</Limit>

# Be warned: use of this directive impacts CPU average load!

#

# Uncomment this if you like to see progress and transfer rate with ftpwho

# in downloads. That is not needed for uploads rates.

# UseSendFile               off

<Global>

  RootLogin                off

  TransferLog              /var/log/proftpd/xferlog

  ExtendedLog              /var/log/proftpd/ftp_traff.log read,write traff

  PathDenyFilter           "\.quota$"

</Global>

# Loading required modules

<IfModule !mod_sql.c>

  LoadModule mod_sql.c

</IfModule>

<IfModule !mod_sql_mysql.c>

  LoadModule mod_sql_mysql.c

</IfModule>

<IfModule !mod_quotatab.c>

  LoadModule mod_quotatab.c

</IfModule>

<IfModule !mod_quotatab_sql.c>

  LoadModule mod_quotatab_sql.c

</IfModule>

#

# SSL via TLS

#

#<IfModule mod_tls.c>

#  TLSEngine                off                           # on for use of TLS

#  TLSLog                   /var/log/proftpd/ftp_ssl.log  # where to log to

#  TLSProtocol              SSLv23                        # SSLv23 or TLSv1

#  TLSOptions               NoCertRequest                 # either to request the certificate or not

#  TLSRSACertificateFile    /etc/proftpd/ssl.crt          # SSL certfile

#  TLSRSACertificateKeyFile /etc/proftpd/ssl.key          # SSL keyfile

#  TLSVerifyClient          off                           # client verification

#</IfModule>

#

# ISPCP Quota management;

#

<IfModule mod_quotatab.c>

  QuotaEngine              on

  QuotaShowQuotas          on

  QuotaDisplayUnits        Mb

  SQLNamedQuery            get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"

  SQLNamedQuery            get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"

  SQLNamedQuery            update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies

  SQLNamedQuery            insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

  QuotaLock                /var/run/proftpd/tally.lock

  QuotaLimitTable          sql:/get-quota-limit

  QuotaTallyTable          sql:/get-quota-tally/update-quota-tally/insert-quota-tally

</IfModule>

<IfModule mod_ratio.c>

  Ratios                   on

</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in

# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02

# It is on by default.

<IfModule mod_delay.c>

  DelayEngine              on

</IfModule>

<IfModule mod_ctrls.c>

  ControlsEngine           on

  ControlsMaxClients       2

  ControlsLog              /var/log/proftpd/controls.log

  ControlsInterval         5

  ControlsSocket           /var/run/proftpd/proftpd.sock

</IfModule>

<IfModule mod_ctrls_admin.c>

  AdminControlsEngine      on

</IfModule>

# ispCP SQL Managment

SQLBackend                 mysql

SQLAuthTypes               Crypt

SQLAuthenticate            on

SQLConnectInfo             ispcp@localhost vftp DEINPASSWORT

SQLUserInfo                ftp_users userid passwd uid gid homedir shell

SQLGroupInfo               ftp_group groupname gid members

SQLMinUserUID             2000

SQLMinUserGID             2000

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>

#   User                   ftp

#   Group                  nogroup

#   # We want clients to be able to login with "anonymous" as well as "ftp"

#   UserAlias              anonymous ftp

#   # Cosmetic changes, all files belongs to ftp user

#   DirFakeUser            on ftp

#   DirFakeGroup           on ftp

#

#   RequireValidShell      off

#

#   # Limit the maximum number of anonymous logins

#   MaxClients             10

#

#   # We want 'welcome.msg' displayed at login, and '.message' displayed

#   # in each newly chdired directory.

#   DisplayLogin           welcome.msg

#   DisplayFirstChdir      .message

#

#   # Limit WRITE everywhere in the anonymous chroot

#   <Directory *>

#     <Limit WRITE>

#       DenyAll

#     </Limit>

#   </Directory>

#

#   # Uncomment this if you're brave.

#   # <Directory incoming>

#   #   # Umask 022 is a good standard umask to prevent new files and dirs

#   #   # (second parm) from being group and world writable.

#   #   Umask              022  022

#   #   <Limit READ WRITE>

#   #     DenyAll

#   #   </Limit>

#   #   <Limit STOR>

#   #     AllowAll

#   #   </Limit>

#   # </Directory>

#

# </Anonymous>

Include /etc/proftpd/ispcp/*

RE: FTP Login geht nicht! - tobi4711 - 04-15-2009 11:26 PM

Starting ftp server: proftpd - Fatal: SQLNamedQuery: expected 'UPDATE' query-string table-name on line 142 of '/etc/proftpd/proftpd.conf'
failed!

RE: FTP Login geht nicht! - BeNe - 04-15-2009 11:35 PM

Hast Du denn den host und das ftp password ersetzt ?
Was für module hast Du geladen ? Findest Du in der modules.conf

Greez BeNe

RE: FTP Login geht nicht! - Lucan - 04-15-2009 11:37 PM

Die Config von mir funktioniert, hab sie grade nochmal überarbeitet und er kommt auch wieder drauf, erhält beim starten von proftp jetzt aber folgende Meldung:

Quote:Starting ftp server: proftpd - warning: handling possibly truncated configuration data at line 227 of '/etc/proftpd/proftpd.conf'
- processing configuration directory '/etc/proftpd/ispcp'

Die Zeile 227 ist aber auskommentiert, merkwürdig.

Ich weiss da auch nicht weiter, auf jeden fall funktionierts jetzt.

Hast du evtl. ne Idee BeNe?
Oder evtl nen anderer der Cracks hier? ;D