[SOLVED] Adding mail users problem

[SOLVED] Adding mail users problem - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega Support Area (/forum-30.html)
+--- Forum: System Setup & Installation (/forum-32.html)
+--- Thread: [SOLVED] Adding mail users problem (/thread-7096.html)

[SOLVED] Adding mail users problem - coper - 07-01-2009 07:48 AM

Hello

I'm having a problem creating e-mail accounts. I can create mail users but the status is Unknown error. I can send e-mails but I can not receive.
And in Action I get N/A where should be Delete and Edit options
This is a new clean ispcp installation.

Any idea about this problem?

Thanks

RE: Adding mail users problem - BeNe - 07-01-2009 04:11 PM

Please use the Debug Modus and Post the Logs:

--> http://www.isp-control.net/documentation/enable_debug_in_ispcp

Greez BeNe

RE: Adding mail users problem - coper - 07-02-2009 02:53 AM

Thanks for te answer.

I activated the Debug and then I created a new mail user.

The logs shows this after that (It's in the attached file)

RE: Adding mail users problem - BeNe - 07-02-2009 06:29 AM

You still use the RC6 ispCP Version ?
After this Version the PW's are crypted - so this can't be the problem in this case.
What happend if you type this command manuelly on the shell ?

Greez BeNe

RE: Adding mail users problem - coper - 07-02-2009 06:38 AM

I'm using RC6 in another server.

This is a new server with Debian Lenny and ispCP 1.0.0 OMEGA build: 20090225

If I type this command on the shell
/ usr /sbin /saslpasswd2 -p -c -f / etc /sasldb2 -u argcine.com.ar prueba

I get this message:

saslpasswd2: invalid parameter supplied

RE: Adding mail users problem - coper - 07-02-2009 09:10 AM

I could solve the problem of receiving e-mails disabling postgrey following this faq
http://www.isp-control.net/component/option,com_easyfaq/Itemid,38/task,view/id,15/

However... Is there a way to solve it without having to disable postgrey? This is not the most important, the important thing is I still have problems to add mail users, I attach a screenshot.

RE: [CLOSED] Adding mail users problem - joximu - 07-03-2009 04:44 PM

according postgrey: normally just needs some time to receive the mails...

Hi Coper

according to the mail users which are not "ok".

Try to run the right command on the shell:

Quote:/bin/echo "prueba123" | /usr/sbin/saslpasswd2 -p -c -f /etc/sasldb2 -u argcine.com.ar prueba

(one line)

/J

RE: [SOLVED] Adding mail users problem - coper - 07-21-2009 07:05 AM

Hello

Thanks for the help.

I reinstall the panel and problem solved.

Regards.

c.