ispCP - Board - Support
pages work but dont dispaly corectly brackets everywhere - Printable Version

+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega Support Area (/forum-30.html)
+--- Forum: System Setup & Installation (/forum-32.html)
+--- Thread: pages work but dont dispaly corectly brackets everywhere (/thread-8686.html)

Pages: 1 2

pages work but dont dispaly corectly brackets everywhere - kingofkya - 12-07-2009 01:39 PM

all my pages look like this i am running centos and i used this guide

http://www.isp-control.net/documentation/doku.php?id=start:installation:centos

I have looked through the forum and only found 1 case of this and some one said it was the templet engine but there was no solution because the user reinstalled his/her server.

help is greatly appreciated thanks

version
ispCP '1.0.2 OMEGA'


{MENU}
{MAIN_MENU}
{TR_GENERAL_INFORMATION}

{PROPS_LIST}

{TR_SERVER_TRAFFIC}

{TRAFF_WARN}
{TRAFFIC_WARNING}

RE: pages work but dont dispaly corectly brackets everywhere - gOOvER - 12-07-2009 01:49 PM

Please more Info's Wink

http://www.isp-control.net/documentation/doku.php?id=frequently_asked_questions:how_can_i_solve_a_problem_not_mentioned_i​n_this_faq

RE: pages work but dont dispaly corectly brackets everywhere - kingofkya - 12-07-2009 01:56 PM

That link don't work anyways

if that dosen't suffice for more information tell me what to go look at

part of the index page see the prob {THEME_COLOR_PATH} should it not be rendered also no images load which look like it the same prob


<td width="33"><img src="{THEME_COLOR_PATH}/images/stats_left.gif" width="33" height="20"></td>
<td width="405" class="stats"><table border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="7"><img src="{THEME_COLOR_PATH}/images/bars/stats_left.gif" width="7" height="13"></td>
<td class="statsBar"><img src="{THEME_COLOR_PATH}/images/trans.gif" width="{BAR_VALUE}" height="1"></td>



How I configured it

Welcome to ispCP '1.0.2 OMEGA' Setup Dialog.
This program will set up ispCP OMEGA system on your server.

Next you are asked to enter a "fully qualified hostname" (FQHN).
For more infos read http://en.wikipedia.org/wiki/FQDN.


Please enter a fully qualified hostname. [xxxxxx]: xxxxxxxxxxxxx

Please enter system network address. [74.63.201.115]:

Please enter the domain name where ispCP OMEGA will run on [xxxxxxxxxxxxxxxx]:

Please enter system SQL database. [ispcp]:

Please enter system SQL user. [root]:

Please enter system SQL password. [none]:
Please repeat system SQL password:

Please enter ispCP ftp SQL user. [vftp]:

Please enter ispCP ftp SQL user password. [auto generate]:


ispCP ftp SQL user password set to: (xxxxxxxxxxxxxxxx!

Please enter ispCP phpMyAdmin Control user. [pma]:
Please enter ispCP phpMyAdmin Control user password. [auto generate]:
phpMyAdmin Control user password set to: xxxxxxxxxxxxxxxxxxxxx

Please enter administrator login name. [admin]:

Please enter administrator password:
Please repeat administrator password:

Please enter administrator e-mail address: xxxxxxxxxxxxxxxxx

IP of Secondary DNS. (optional) []:

Use MySQL Prefix.
Possible values: [i]nfront, [b]ehind, [n]one. [none]:

FastCGI Version: [f]cgid or fast[c]gi. [fcgid]: c

Activate AWStats. [no]: yes

AWStats Mode:
Possible values [d]ynamic and [s]tatic. [dynamic]:

Starting Installation...


Setting GUI Permissions: ................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​................................................................................​...........done
Setting Engine Permissions: .............done

Congratulations!

ispCP '1.0.2 OMEGA' Setup completed successfully!
[2009-12-06 21:13:52]: target uid/gid (2000/2000) mismatch with directory (2000$
[2009-12-06 21:13:54]: uid: (2000/vu2000) gid: (2000/2000) cmd: php5-fcgi-start$
[2009-12-06 21:13:54]: target uid/gid (2000/2000) mismatch with directory (2000$
[2009-12-06 22:15:20]: uid: (2000/vu2000) gid: (2000/2000) cmd: php5-fcgi-start$
[Sun Dec 06 21:16:50 2009] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Sun Dec 06 21:16:50 2009] [notice] Digest: generating secret for digest authentication ...
[Sun Dec 06 21:16:50 2009] [notice] Digest: done
[Sun Dec 06 21:16:50 2009] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations
[Sun Dec 06 21:16:52 2009] [error] [client 72.193.103.225] File does not exist: /var/www/html/{BACKBUTTONDESTINATION}, referer: http://buizel.net/index.php

RE: pages work but dont dispaly corectly brackets everywhere - gOOvER - 12-07-2009 04:44 PM

Why did you report this thread?

RE: pages work but dont dispaly corectly brackets everywhere - motokochan - 12-08-2009 04:36 PM

kingofkya, as far as i can determine, it's an issue with PHP 5.3's stricter handling of parameters in functions.. Use the solution in this post.

RE: pages work but dont dispaly corectly brackets everywhere - kingofkya - 12-08-2009 05:06 PM

I think i hit report rather that submit on my edit sry:


thanks for the help

I noticed on the guide it said version 1.0.3 so i downloaded the svn and for the most part it works.

ispCP 1.0.3 OMEGA
build: 20090823
Codename: Orpheus

I do have 2 other question related to proftp i looked though the stuff in the wiki and i don't see a solution.

when i hit chose directory from the create ftp user page proftp gives me this:
http://www.xxxxxx.net (127.0.0.1[127.0.0.1]) - USER tmp_4b1df9fb33770@xxxxx.net (Login failed): Incorrect password.


also when , when a "user" acount is created what still needs to be set up once its there because the webroot folder doesn't link to anything i see.

Thanks again
also as a side note i think i found a bug

on centos if the install script dies and it is rerun it never updates the proftp.conf with a new password

RE: pages work but dont dispaly corectly brackets everywhere - motokochan - 12-09-2009 03:27 AM

(12-08-2009 05:06 PM)kingofkya Wrote:  when i hit chose directory from the create ftp user page proftp gives me this:
http://www.xxxxxx.net (127.0.0.1[127.0.0.1]) - USER tmp_4b1df9fb33770@xxxxx.net (Login failed): Incorrect password.

Sounds like the has bug I ran into. What version of PHP are you using?


(12-08-2009 05:06 PM)kingofkya Wrote:  also when , when a "user" acount is created what still needs to be set up once its there because the webroot folder doesn't link to anything i see.

Webroot folder? Could you explain what you are looking for? There should be an "htdocs" folder, which is the root of the website and it should have the base template in it.

RE: pages work but dont dispaly corectly brackets everywhere - kingofkya - 12-09-2009 03:57 AM

(12-09-2009 03:27 AM)motokochan Wrote:  Sounds like the has bug I ran into. What version of PHP are you using?
centos package name php-5.1.6-23.2.el5_3.i386


(12-09-2009 03:27 AM)motokochan Wrote:  Webroot folder? Could you explain what you are looking for? There should be an "htdocs" folder, which is the root of the website and it should have the base template in it.
i mean when you make a new ftp user it goes to /home/user/ not /var/www/virtural/site

and /home/user has a webroot folder thats all

RE: pages work but dont dispaly corectly brackets everywhere - motokochan - 12-09-2009 06:19 AM

I don't believe PHP 5.1 works well with ispCP Omega, you should use the latest PHP packages from the REMI repository (see CentOS install documentation on the wiki here). At the very least, I haven't tested with that early of a PHP 5 version.

vsftp is installed and running by default. Make sure to stop the service and remove it and start proftpd. That little part was left out of the install instructions.

RE: pages work but dont dispaly corectly brackets everywhere - kingofkya - 12-09-2009 11:24 AM

(12-09-2009 06:19 AM)motokochan Wrote:  I don't believe PHP 5.1 works well with ispCP Omega, you should use the latest PHP packages from the REMI repository (see CentOS install documentation on the wiki here). At the very least, I haven't tested with that early of a PHP 5 version.


vsftp is installed and running by default. Make sure to stop the service and remove it and start proftpd. That little part was left out of the install instructions.

PHP 5.3.1 is running now and vsftpd is removed

however the issues remains that the ftp is going to the home directory.

and it turnes out its reading the unix users because i can remove the user via the gui and proftp can still connect with that user id also any user created in the gui can not connect.


does any of this mean anything

particulay
mod_ident/1.0: ident lookup disabled
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - AuthOrder in effect, resetting auth module order


ProFTPD 1.3.2b (maint) (built Mon Nov 16 15:11:10 EST 2009) standalone mode STARTUP
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - session requested from client in unknown class
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - mod_lang/0.9: using en_US.UTF-8 messages
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - mod_lang/0.9: using en_US.UTF-8 messages
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - mod_cap/1.0: adding CAP_AUDIT_WRITE capability
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - mod_ident/1.0: ident lookup disabled
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - AuthOrder in effect, resetting auth module order
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - connected - local : 127.0.0.1:21
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - connected - remote : 127.0.0.1:44549
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - FTP session opened.
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching PRE_CMD command 'USER webroot' to mod_tls
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching PRE_CMD command 'USER webroot' to mod_core
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching PRE_CMD command 'USER webroot' to mod_core
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching PRE_CMD command 'USER webroot' to mod_delay
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching PRE_CMD command 'USER webroot' to mod_auth
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching CMD command 'USER webroot' to mod_auth
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - no supplemental groups found for user 'webroot'
http://www.xxxxx.net (127.0.0.1[127.0.0.1]) - dispatching POST_CMD command 'USER
ok figured out the unix user thing

disbaled

AuthOrder mod_sql.c
##mod_auth_pam.c* mod_auth_unix.c

but i cant figure out where to look to find why its not using whats in the db