+- ispCP - Board - Support (http://www.isp-control.net/forum)
+-- Forum: ispCP Omega Development Area (/forum-1.html)
+--- Forum: General discussion (/forum-11.html)
+--- Thread: install directory problem (/thread-9585.html)
install directory problem - jonas1045 - 02-12-2010 06:41 AM
When i install ispcp get to the step where i should change to "cd /var/www/ispcp/engine/setup" it says "No such file or directory". What have i doing wrong? I has follow the guide on debian and ubuntu.
Please help, and i am new so please explain good thanks
RE: install directory problem - kilburn - 02-12-2010 09:40 AM
You haven't followed *all* the installation steps. Concretely, you've skipped -at least- the step 5.
RE: install directory problem - jonas1045 - 02-12-2010 06:26 PM
Yes i skip step 5 because its also says "No such file or directory".
I never thought step 5 was so important, i think it was for own security reason.
RE: install directory problem - kilburn - 02-12-2010 06:45 PM
I said *at least*, and yes... every step in the installation guide is essential. Now, if you get a "file does not exist" in step 5, it means that you also missed *at least* step 4 too (or it errored and you ignored the error).
Follow the guide thoroughly and show us any errors you get if it doesn't work.
RE: install directory problem - jonas1045 - 02-13-2010 01:34 AM
Thanks for the help.
I start all over and my first error is "cp: cannot stat `/tmp/ispcp/*': No such file or directory" when i run the command "cp -R /tmp/ispcp/* /"
RE: install directory problem - kilburn - 02-13-2010 02:53 AM
What is the output of the previous step (make install)?
RE: install directory problem - jonas1045 - 02-13-2010 04:01 AM
Here is all there are in the window:
Unpacking php5-adodb (from .../php5-adodb_5.04-3_i386.deb) ...
Selecting previously deselected package php5-gd.
Unpacking php5-gd (from .../php5-gd_5.2.6.dfsg.1-1+lenny4_i386.deb) ...
Selecting previously deselected package php5-mcrypt.
Unpacking php5-mcrypt (from .../php5-mcrypt_5.2.6.dfsg.1-1+lenny4_i386.deb) ...
Selecting previously deselected package php5-mhash.
Unpacking php5-mhash (from .../php5-mhash_5.2.6.dfsg.1-1+lenny4_i386.deb) ...
Selecting previously deselected package php5-mysql.
Unpacking php5-mysql (from .../php5-mysql_5.2.6.dfsg.1-1+lenny4_i386.deb) ...
Selecting previously deselected package policyd-weight.
Unpacking policyd-weight (from .../policyd-weight_0.1.14.17-5_all.deb) ...
Selecting previously deselected package postgrey.
Unpacking postgrey (from .../postgrey_1.31-3.2_all.deb) ...
Selecting previously deselected package proftpd-basic.
Unpacking proftpd-basic (from .../proftpd-basic_1.3.1-17lenny4_i386.deb) ...
Selecting previously deselected package proftpd-mod-mysql.
Unpacking proftpd-mod-mysql (from .../proftpd-mod-mysql_1.3.1-17lenny4_i386.deb) ...
Selecting previously deselected package proftpd-mod-pgsql.
Unpacking proftpd-mod-pgsql (from .../proftpd-mod-pgsql_1.3.1-17lenny4_i386.deb) ...
Selecting previously deselected package proftpd-mod-ldap.
Unpacking proftpd-mod-ldap (from .../proftpd-mod-ldap_1.3.1-17lenny4_i386.deb) ...
Selecting previously deselected package proftpd.
Unpacking proftpd (from .../proftpd_1.3.1-17lenny4_all.deb) ...
Selecting previously deselected package rkhunter.
Unpacking rkhunter (from .../rkhunter_1.3.2-6_all.deb) ...
Selecting previously deselected package courier-imap.
Unpacking courier-imap (from .../courier-imap_4.4.0-2_i386.deb) ...
Selecting previously deselected package courier-pop.
Unpacking courier-pop (from .../courier-pop_0.60.0-2_i386.deb) ...
Selecting previously deselected package libsnmp-session-perl.
Unpacking libsnmp-session-perl (from .../libsnmp-session-perl_1.12-1_all.deb) ...
Selecting previously deselected package unhide.
Unpacking unhide (from .../unhide_20080519-2_i386.deb) ...
Setting up libdbd-mysql-perl (4.007-1+lenny1) ...
Setting up mysql-client-5.0 (5.0.51a-24+lenny2+spu1) ...
Setting up mysql-server-5.0 (5.0.51a-24+lenny2+spu1) ...
Stopping MySQL database server: mysqld.
Starting MySQL database server: mysqld.
Checking for corrupt, not cleanly closed and upgrade needing tables..
Setting up original-awk (2007-10-23-1) ...
Setting up dictionaries-common (0.98.12) ...
Updating OpenOffice.org's dictionary list... done.
Setting up dnsutils (1:9.5.1.dfsg.P3-1+lenny1) ...
Setting up patch (2.5.9-5) ...
Setting up wamerican (6-2.3) ...
Setting up apache2-mpm-worker (2.2.9-10+lenny6) ...
Starting web server: apache2WARNING: MaxClients (10) must be at least as large
as ThreadsPerChild (25). Automatically
increasing MaxClients to 25.
.
Setting up apache2-suexec (2.2.9-10+lenny6) ...
Setting up awstats (6.7.dfsg-5.1) ...
Setting up chkrootkit (0.48-8) ...
Setting up tcl8.4 (8.4.19-2) ...
Setting up expect (5.43.0-17) ...
Setting up courier-authlib (0.61.0-1+lenny1) ...
Setting up courier-authdaemon (0.61.0-1+lenny1) ...
Starting Courier authentication services: authdaemond.
Setting up courier-authlib-userdb (0.61.0-1+lenny1) ...
Setting up libfam0 (2.7.0-13.3+lenny1) ...
Setting up courier-base (0.60.0-2) ...
Setting up postfix (2.5.5-1.1) ...
Adding group `postfix' (GID 110) ...
Done.
Adding system user `postfix' (UID 108) ...
Adding new user `postfix' (UID 108) with group `postfix' ...
Not creating home directory `/var/spool/postfix'.
Creating /etc/postfix/dynamicmaps.cf
Adding tcp map entry to /etc/postfix/dynamicmaps.cf
Adding group `postdrop' (GID 111) ...
Done.
setting myhostname: srv1.starhost.dk
setting alias maps
setting alias database
changing /etc/mailname to starhost.dk
setting myorigin
setting destinations: starhost.dk, srv1.starhost.dk, localhost.starhost.dk, localhost
setting relayhost:
setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
setting mailbox_command
setting mailbox_size_limit: 0
setting recipient_delimiter: +
setting inet_interfaces: all
WARNING: /etc/aliases exists, but does not have a root alias.
Postfix is now set up with a default configuration. If you need to make
changes, edit
/etc/postfix/main.cf (and others) as needed. To view Postfix configuration
values, see postconf(1).
After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.
Running newaliases
Stopping Postfix Mail Transport Agent: postfix.
Starting Postfix Mail Transport Agent: postfix.
Setting up courier-maildrop (0.60.0-2) ...
Setting up libgmp3c2 (2:4.2.2+dfsg-3) ...
Setting up libmpfr1ldbl (2.3.1.dfsg.1-2) ...
Setting up cpp-4.3 (4.3.2-1.1) ...
Setting up cpp (4:4.3.2-2) ...
Setting up fam (2.7.0-13.3+lenny1) ...
Starting file alteration monitor: FAM.
Setting up libgomp1 (4.3.2-1.1) ...
Setting up gcc-4.3 (4.3.2-1.1) ...
Setting up gcc (4:4.3.2-2) ...
Setting up libapache2-mod-fastcgi (2.4.6-1) ...
Enabling module fastcgi.
Run '/etc/init.d/apache2 restart' to activate new configuration!
Setting up libapache2-mod-fcgid (1:2.2-1) ...
Setting up libberkeleydb-perl (0.34-1+b1) ...
Setting up libcarp-clan-perl (6.00-1) ...
Setting up libbit-vector-perl (6.4-7+b1) ...
Setting up linux-libc-dev (2.6.26-21) ...
Setting up libc6-dev (2.7-18lenny2) ...
Setting up libcrypt-blowfish-perl (2.10-1+b1) ...
Setting up libcrypt-cbc-perl (2.29-1) ...
Setting up libcrypt-passwdmd5-perl (1.3-9) ...
Setting up libdate-calc-perl (5.4-5+b1) ...
Setting up libdate-manip-perl (5.54-1) ...
Setting up libdigest-sha1-perl (2.11-2+b1) ...
Setting up libdigest-hmac-perl (1.01-7) ...
Setting up libfile-basedir-perl (0.03-0.1) ...
Setting up libfile-desktopentry-perl (0.04-1) ...
Setting up shared-mime-info (0.30-2) ...
Setting up libfile-mimeinfo-perl (0.15-1) ...
Setting up libgd2-xpm (2.0.36~rc1~dfsg-3+lenny1) ...
Setting up libio-multiplex-perl (1.09-2) ...
Setting up libsocket6-perl (0.20-1) ...
Setting up libio-socket-inet6-perl (2.54-1) ...
Setting up libsys-hostname-long-perl (1.4-2) ...
Setting up libmail-sendmail-perl (0.79-5) ...
Setting up libmcrypt4 (2.5.7-5) ...
Setting up libmhash2 (0.9.9-1) ...
Setting up libnet-cidr-perl (0.11-3) ...
Setting up libnet-ip-perl (1.25-2) ...
Setting up libnet-dns-perl (0.63-2) ...
Setting up libnet-libidn-perl (0.07-1+b1) ...
Setting up libnet-netmask-perl (1.9015-3) ...
Setting up libnet-rblclient-perl (0.5-2) ...
Setting up libnet-server-perl (0.97-1) ...
Setting up libnet-smtp-server-perl (1.1-3) ...
Setting up libnet-xwhois-perl (0.90-3) ...
Setting up libparse-syslog-perl (1.10-1) ...
Setting up libsasl2-modules (2.1.22.dfsg1-23+lenny1) ...
Setting up libsys-syslog-perl (0.26-1) ...
Setting up libt1-5 (5.1.2-3) ...
Setting up libterm-readkey-perl (2.30-4) ...
Setting up libterm-readpassword-perl (0.11-2) ...
Setting up mysql-client (5.0.51a-24+lenny2+spu1) ...
Setting up mysql-server (5.0.51a-24+lenny2+spu1) ...
Setting up php5-common (5.2.6.dfsg.1-1+lenny4) ...
Setting up php5-cli (5.2.6.dfsg.1-1+lenny4) ...
Creating config file /etc/php5/cli/php.ini with new version
Setting up php-pear (5.2.6.dfsg.1-1+lenny4) ...
Setting up php5-cgi (5.2.6.dfsg.1-1+lenny4) ...
Creating config file /etc/php5/cgi/php.ini with new version
Setting up php5 (5.2.6.dfsg.1-1+lenny4) ...
Setting up php5-adodb (5.04-3) ...
Setting up php5-gd (5.2.6.dfsg.1-1+lenny4) ...
Setting up php5-mcrypt (5.2.6.dfsg.1-1+lenny4) ...
Setting up php5-mhash (5.2.6.dfsg.1-1+lenny4) ...
Setting up php5-mysql (5.2.6.dfsg.1-1+lenny4) ...
Setting up policyd-weight (0.1.14.17-5) ...
Starting policyd-weight: policyd-weight.
Setting up postgrey (1.31-3.2) ...
Warning: The home dir /var/lib/postgrey you specified can't be accessed: No such file or directory
Adding system user `postgrey' (UID 110) ...
Adding new group `postgrey' (GID 113) ...
Adding new user `postgrey' (UID 110) with group `postgrey' ...
Not creating home directory `/var/lib/postgrey'.
Creating config file /etc/postgrey/whitelist_clients with new version
Creating config file /etc/postgrey/whitelist_recipients with new version
Creating config file /etc/default/postgrey with new version
Starting postfix greylisting daemon: postgrey.
Setting up proftpd-basic (1.3.1-17lenny4) ...
--------- IMPORTANT INFORMATION FOR XINETD USERS ----------
The following line will be added to your /etc/inetd.conf file:
ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/proftpd
If you are indeed using xinetd, you will have to convert the
above into /etc/xinetd.conf format, and add it manually. See
/usr/share/doc/xinetd/README.Debian for more information.
Suggested entry (automatically converted using itox):
service ftp
{
socket_type = stream
protocol = tcp
wait = no
user = root
You must use option -daemon_dir if you use tcpd
-----------------------------------------------------------
Adding system user `proftpd' (UID 111) ...
Adding new user `proftpd' (UID 111) with group `nogroup' ...
Not creating home directory `/var/run/proftpd'.
Adding system user `ftp' (UID 112) ...
Adding new user `ftp' (UID 112) with group `nogroup' ...
Creating home directory `/home/ftp' ...
`/usr/share/proftpd/templates/welcome.msg' -> `/home/ftp/welcome.msg.proftpd-new'
Starting ftp server: proftpd.
Setting up proftpd-mod-mysql (1.3.1-17lenny4) ...
Setting up proftpd-mod-pgsql (1.3.1-17lenny4) ...
Setting up proftpd-mod-ldap (1.3.1-17lenny4) ...
Setting up proftpd (1.3.1-17lenny4) ...
Setting up rkhunter (1.3.2-6) ...
Updating the file properties database:
[ Rootkit Hunter version 1.3.2 ]
File created: searched for 154 files, found 127
Setting up courier-imap (4.4.0-2) ...
Starting Courier IMAP server: imapd.
Setting up courier-pop (0.60.0-2) ...
Starting Courier POP3 server: pop3d.
Setting up libsnmp-session-perl (1.12-1) ...
Setting up unhide (20080519-2) ...
Using '/usr/sbin/unhide-linux26' to provide 'unhide'.
Setting up ispell (3.1.20.0-4.4) ...
Setting up iamerican (3.1.20.0-4.4) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
srv1:/usr/local/src/ispcp/ispcp-omega-1.0.3# cp -R /tmp/ispcp/* /
cp: cannot stat `/tmp/ispcp/*': No such file or directory
srv1:/usr/local/src/ispcp/ispcp-omega-1.0.3#
RE: install directory problem - kilburn - 02-13-2010 04:15 AM
Are you kidding me or what's wrong with you?
You must execute step 4 before step 5 (you didn't!).
It's not that difficult...
RE: install directory problem - jonas1045 - 02-13-2010 06:00 AM
sorry
i miss that...
But i works now, thanks for the help!
RE: install directory problem - Nuxwin - 02-13-2010 08:36 AM
(02-13-2010 04:15 AM)kilburn Wrote: Are you kidding me or what's wrong with you?
You must execute step 4 before step 5 (you didn't!).
It's not that difficult...
If you want I can lend you my gun
