Current time: 11-27-2024, 03:45 PM Hello There, Guest! (LoginRegister)


Post Reply 
FTP, MYSQL Buttons und Funktionen??
Author Message
Lucan Offline
Member
*
Beta Team

Posts: 982
Joined: Jul 2008
Reputation: 12
Post: #11
RE: FTP, MYSQL Buttons und Funktionen??
host: die IP von deinem Server
User: deinftpuser@deinedomain.de
passwort: das was du für den FTP User angegeben hast.
05-02-2009 08:30 PM
Find all posts by this user Quote this message in a reply
Pooria Offline
Junior Member
*

Posts: 12
Joined: May 2009
Reputation: 0
Post: #12
RE: FTP, MYSQL Buttons und Funktionen??
Ich habe die proftpd.conf per putty gesucht und der hat
mehere gefunden.

Code:
/etc/proftpd/proftpd.conf
/etc/proftpd.conf
/etc/ispcp/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/freebsd/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/redhat/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/ubuntu/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/fedora/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/debian/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/centos/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/gentoo/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/openbsd/proftpd/proftpd.conf
/usr/local/src/ispcp/ispcp-omega-1.0.0/configs/opensuse/proftpd/proftpd.conf
/usr/share/proftpd/templates/proftpd.conf

in der "/etc/proftpd.conf" sind nur 2 mit # vor
1x : "#<IfModule mod_tls.c>"
& 1x: "#<Anonymous ~ftp>....."

ich komm immer noch nicht im ftp rein mit den daten, auch nicht
mit einen anderen ftp tool wie filezilla.
(This post was last modified: 05-02-2009 09:00 PM by Pooria.)
05-02-2009 08:50 PM
Find all posts by this user Quote this message in a reply
Lucan Offline
Member
*
Beta Team

Posts: 982
Joined: Jul 2008
Reputation: 12
Post: #13
RE: FTP, MYSQL Buttons und Funktionen??
/etc/proftpd/proftpd.conf

ist die die du brauchst.
05-02-2009 09:01 PM
Find all posts by this user Quote this message in a reply
Pooria Offline
Junior Member
*

Posts: 12
Joined: May 2009
Reputation: 0
Post: #14
RE: FTP, MYSQL Buttons und Funktionen??
(05-02-2009 09:01 PM)Lucan Wrote:  /etc/proftpd/proftpd.conf

ist die die du brauchst.

habe die datei geöffnet:
Code:
ServerName       "Debian"
ServerType        standalone
DeferWelcome        off

muss nicht bei "Debian" meine server IP oder Domain eigentlich stehen?
und diese einstellung ist auf off:
Code:
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
05-02-2009 09:12 PM
Find all posts by this user Quote this message in a reply
Lucan Offline
Member
*
Beta Team

Posts: 982
Joined: Jul 2008
Reputation: 12
Post: #15
RE: FTP, MYSQL Buttons und Funktionen??
da muss mehr drinn stehen?!
05-02-2009 09:22 PM
Find all posts by this user Quote this message in a reply
Pooria Offline
Junior Member
*

Posts: 12
Joined: May 2009
Reputation: 0
Post: #16
RE: FTP, MYSQL Buttons und Funktionen??
da steht mehr drinne:

Quote:# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off

ServerName "Debian"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter \*.*/

# Use this to jail all users in their homes
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=de...2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>

Edit: Wenn ich auf "Choose dir" klicke, kommt jedes mal:
Code:
Can not open directory !
Please contact your administrator !
(This post was last modified: 05-02-2009 09:58 PM by Pooria.)
05-02-2009 09:29 PM
Find all posts by this user Quote this message in a reply
Lucan Offline
Member
*
Beta Team

Posts: 982
Joined: Jul 2008
Reputation: 12
Post: #17
RE: FTP, MYSQL Buttons und Funktionen??
Deine Config ist falsch, such bitte was im Forum, da wurde X mal die richtige gepostet.
05-02-2009 10:46 PM
Find all posts by this user Quote this message in a reply
Pooria Offline
Junior Member
*

Posts: 12
Joined: May 2009
Reputation: 0
Post: #18
RE: FTP, MYSQL Buttons und Funktionen??
hab die SUFU grade benutzt und wurde nicht fündig, kannst du mir
villeicht bitte sagen was falsch ist in der config oder mir den link zum topic
geben den du meinst?

ps: habe mich grade in den ispCP eingeloggt als admin und bei rootkit log stand
Checking `bindshell'... INFECTED (PORTS: 465)
(This post was last modified: 05-02-2009 11:52 PM by Pooria.)
05-02-2009 11:45 PM
Find all posts by this user Quote this message in a reply
Lucan Offline
Member
*
Beta Team

Posts: 982
Joined: Jul 2008
Reputation: 12
Post: #19
RE: FTP, MYSQL Buttons und Funktionen??
Wenn du nur proftp bei der Suche eingibst, kommen massig threads, die die selbe Problematik behandeln.

Die richtige config findest du z.B. hier, falls du Lenny nutzt:
http://www.isp-control.net/ispcp/browser...conf.lenny

Dort musst du aber noch die variablen in den { } ersetzen.
(This post was last modified: 05-02-2009 11:52 PM by Lucan.)
05-02-2009 11:52 PM
Find all posts by this user Quote this message in a reply
Pooria Offline
Junior Member
*

Posts: 12
Joined: May 2009
Reputation: 0
Post: #20
RE: FTP, MYSQL Buttons und Funktionen??
ok ich werde diese config heute testen wenn ich wieder da bin, danach werde ich die nachricht hier bearbeiten und schreiben ob es geklappt hat oder nicht.
Danke erst mal Smile
05-02-2009 11:57 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)