Threaded Mode | Linear Mode

nadim · 10-18-2009 10:48 PM

(10-18-2009 06:47 PM)server801 Wrote: да закомменьте и все!эта опция вообщем то и не особо нужна.а если нужна,то

Code:

DisplayChdir .message

Что закоментировать? и где эта строка? и для чего?

**server801** · 10-19-2009 05:38 AM

(10-18-2009 10:48 PM)nadim Wrote:
(10-18-2009 06:47 PM)server801 Wrote: да закомменьте и все!эта опция вообщем то и не особо нужна.а если нужна,то

Code:

DisplayChdir .message

Что закоментировать? и где эта строка? и для чего?

Code:

# DisplayLogin welcome.msg

# DisplayFirstChdir .message

закомментить это,и вставить директиву что писал выше

**data-stream_ru** · 10-25-2009 04:14 AM

С proftpd я проблем наимелся.
Дело в том, что там очень много изменений в конфиге и старые настройки при обновлении выдают ошибки бесчисленные.
Если делаете обновления, то надо очень внимательно читать мануалы и описания релизов, а если через yum то смотреть файл /etc/не_помню_как.rpm

**server801** · 10-25-2009 05:19 AM

насколько я знаю,то конфиги не меняются у proftpd при обновлении.

tronix · 10-25-2009 05:22 AM

(10-25-2009 04:14 AM)data-stream_ru Wrote: С proftpd я проблем наимелся.
Дело в том, что там очень много изменений в конфиге и старые настройки при обновлении выдают ошибки бесчисленные.
Если делаете обновления, то надо очень внимательно читать мануалы и описания релизов, а если через yum то смотреть файл /etc/не_помню_как.rpm

Да ты заебал уже со своим редхатом и ямом! Хоть посмотри на главной странице сайта что ты тут модерируешь и доку почитай! Тут с редхатом 0.000001 % на сайте, это ты!

scc · 11-05-2009 08:09 PM

Воопщем панель поставил из ночной сборки версия 1.03.
При прочитаных здесь изменениях потправил конфиг , но в итоге так и не заходит по фтп.Фаервол ненастроен. Система

Code:

web:/home/sc# uname -a

Debian Linux web 2.6.26-2-686 #1 SMP Sat Oct 17 17:59:23 UTC 2009 i686 GNU/Linux

Code:

/home/sc# proftpd -t

Checking syntax of configuration file

 - setting default address to 192.168.2.2

 - processing configuration directory '/etc/proftpd/ispcp'

Syntax check complete.

Code:

web:/home/sc# ps awx | grep proftpd

 3319 ?        Ss     0:00 proftpd: (accepting connections)

18284 pts/1    R+     0:00 grep proftpd

Code:

/home/sc# /usr/sbin/proftpd -l

Compiled-in modules:

  mod_core.c

  mod_xfer.c

  mod_auth_unix.c

  mod_auth_file.c

  mod_auth.c

  mod_ls.c

  mod_log.c

  mod_site.c

  mod_delay.c

  mod_dso.c

  mod_auth_pam.c

  mod_readme.c

  mod_cap.c

  mod_ctrls.c

  mod_lang.c

сам конфиг /etc/proftpd/proftpd.conf

Code:

# Includes DSO modules (this is mandatory in proftpd 1.3)

Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.

UseIPv6                    off

ServerName                 "ftp.local.ru"

ServerType                 standalone

DeferWelcome               off

MultilineRFC2228           on

DefaultServer              on

ShowSymlinks               on

AllowOverwrite             on

UseReverseDNS              off

IdentLookups               off

AllowStoreRestart          on

AllowForeignAddress        on

LogFormat                  traff "%b %u"

TimeoutLogin               120

TimeoutNoTransfer          600

TimeoutStalled             600

TimeoutIdle                1200

#DisplayLogin               welcome.msg

#DisplayChdir          message

DefaultAddress        192.168.2.2

ListOptions                "-l"

#LsDefaultOptions           "-l"

DenyFilter                 \*.*/

DefaultRoot                ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:

# PersistentPasswd         off

# Port 21 is the standard FTP port.

Port                       21

# In some cases you have to specify passive ports range to by-pass

# firewall limitations. Ephemeral ports can be used for that, but

# feel free to use a more narrow range.

#PassivePorts               49152 65534

# To prevent DoS attacks, set the maximum number of child processes

# to 30.  If you need to allow more than 30 concurrent connections

# at once, simply increase this value.  Note that this ONLY works

# in standalone mode, in inetd mode you should use an inetd server

# that allows you to limit maximum number of processes per service

# (such as xinetd)

MaxInstances               30

# Set the user and group that the server normally runs at.

User                       nobody

Group                      nogroup

В чем может быть еще ошибка подскажите пожайлуста.

**server801** · 11-05-2009 09:18 PM

(11-05-2009 08:09 PM)scc Wrote: Воопщем панель поставил из ночной сборки версия 1.03.
При прочитаных здесь изменениях потправил конфиг , но в итоге так и не заходит по фтп.Фаервол ненастроен. Система

Code:

web:/home/sc# uname -a Debian Linux web 2.6.26-2-686 #1 SMP Sat Oct 17 17:59:23 UTC 2009 i686 GNU/Linux

Code:

/home/sc# proftpd -t Checking syntax of configuration file - setting default address to 192.168.2.2 - processing configuration directory '/etc/proftpd/ispcp' Syntax check complete.

Code:

web:/home/sc# ps awx | grep proftpd 3319 ?        Ss     0:00 proftpd: (accepting connections) 18284 pts/1    R+     0:00 grep proftpd

Code:

/home/sc# /usr/sbin/proftpd -l Compiled-in modules:   mod_core.c   mod_xfer.c   mod_auth_unix.c   mod_auth_file.c   mod_auth.c   mod_ls.c   mod_log.c   mod_site.c   mod_delay.c   mod_dso.c   mod_auth_pam.c   mod_readme.c   mod_cap.c   mod_ctrls.c   mod_lang.c
сам конфиг /etc/proftpd/proftpd.conf

Code:

# Includes DSO modules (this is mandatory in proftpd 1.3) Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6                    off ServerName                 "ftp.local.ru" ServerType                 standalone DeferWelcome               off MultilineRFC2228           on DefaultServer              on ShowSymlinks               on AllowOverwrite             on UseReverseDNS              off IdentLookups               off AllowStoreRestart          on AllowForeignAddress        on LogFormat                  traff "%b %u" TimeoutLogin               120 TimeoutNoTransfer          600 TimeoutStalled             600 TimeoutIdle                1200 #DisplayLogin               welcome.msg #DisplayChdir          message DefaultAddress        192.168.2.2 ListOptions                "-l" #LsDefaultOptions           "-l" DenyFilter                 \*.*/ DefaultRoot                ~ # Uncomment this if you are using NIS or LDAP to retrieve passwords: # PersistentPasswd         off # Port 21 is the standard FTP port. Port                       21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. #PassivePorts               49152 65534 # To prevent DoS attacks, set the maximum number of child processes # to 30.  If you need to allow more than 30 concurrent connections # at once, simply increase this value.  Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances               30 # Set the user and group that the server normally runs at. User                       nobody Group                      nogroup
В чем может быть еще ошибка подскажите пожайлуста.

Code:

/etc/init.d/proftpd start

что выведет?

scc · 11-05-2009 09:39 PM

Code:

web:/home/sc# /etc/init.d/proftpd start

Starting ftp server: proftpd.

При повторной команде то же самое такое ощущение что ваще не стартует. Sad

В логах так же пусто.

**server801** · 11-05-2009 09:53 PM

Code:

#

# ispCP ω (OMEGA) a Virtual Hosting Control System

#

# @copyright    2001-2006 by moleSoftware GmbH

# @copyright    2006-2009 by ispCP | http://isp-control.net

# @version              SVN: $Id: proftpd1.3.conf.lenny 1871 2009-07-28 13:14:57Z nuxwin $

# @link                 http://isp-control.net

# @author               ispCP Team

#

# @license

#   This program is free software; you can redistribute it and/or modify it under

#   the terms of the MPL General Public License as published by the Free Software

#   Foundation; either version 1.1 of the License, or (at your option) any later

#   version.

#   You should have received a copy of the MPL Mozilla Public License along with

#   this program; if not, write to the Open Source Initiative (OSI)

#   http://opensource.org | osi@opensource.org

#

################################################################################​

# Includes DSO modules (this is mandatory in proftpd 1.3)

Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.

UseIPv6                    off

ServerName                 "webhost.vfose.ru"

ServerType                 standalone

DeferWelcome               off

MultilineRFC2228           on

DefaultServer              on

ShowSymlinks               on

AllowOverwrite             on

UseReverseDNS              off

IdentLookups               off

AllowStoreRestart          on

AllowForeignAddress        on

LogFormat                  traff "%b %u"

TimeoutLogin               120

TimeoutNoTransfer          600

TimeoutStalled             600

TimeoutIdle                1200

DisplayLogin               welcome.msg

DisplayChdir          message

ListOptions                "-l"

#LsDefaultOptions           "-l"

DenyFilter                 \*.*/

DefaultRoot                ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:

# PersistentPasswd         off

# Port 21 is the standard FTP port.

Port                       21

# In some cases you have to specify passive ports range to by-pass

# firewall limitations. Ephemeral ports can be used for that, but

# feel free to use a more narrow range.

#PassivePorts               49152 65534

# To prevent DoS attacks, set the maximum number of child processes

# to 30.  If you need to allow more than 30 concurrent connections

# at once, simply increase this value.  Note that this ONLY works

# in standalone mode, in inetd mode you should use an inetd server

# that allows you to limit maximum number of processes per service

# (such as xinetd)

MaxInstances               30

# Set the user and group that the server normally runs at.

User                       nobody

Group                      nogroup

# Normally, we want files to be overwriteable.

<Directory /*>

  # Umask 022 is a good standard umask to prevent new files and dirs

  # (second parm) from being group and world writable.

  Umask                    022  022

  # Normally, we want files to be overwriteable.

  AllowOverwrite           on

  HideNoAccess             on

</Directory>

<Limit ALL>

  IgnoreHidden             on

</Limit>

# Be warned: use of this directive impacts CPU average load!

#

# Uncomment this if you like to see progress and transfer rate with ftpwho

# in downloads. That is not needed for uploads rates.

# UseSendFile               off

<Global>

  RootLogin                off

  TransferLog              /var/log/proftpd/xferlog

  ExtendedLog              /var/log/proftpd/ftp_traff.log read,write traff

  PathDenyFilter           "\.quota$"

</Global>

# Loading required modules

<IfModule !mod_sql.c>

  LoadModule               mod_sql.c

  AuthOrder                mod_sql.c

</IfModule>

<IfModule !mod_sql_mysql.c>

  LoadModule               mod_sql_mysql.c

</IfModule>

<IfModule !mod_quotatab.c>

  LoadModule               mod_quotatab.c

</IfModule>

<IfModule !mod_quotatab_sql.c>

  LoadModule               mod_quotatab_sql.c

</IfModule>

#

# SSL via TLS

#

#<IfModule mod_tls.c>

#  TLSEngine                off                           # on for use of TLS

#  TLSLog                   /var/log/proftpd/ftp_ssl.log  # where to log to

#  TLSProtocol              SSLv23                        # SSLv23 or TLSv1

#  TLSOptions               NoCertRequest                 # either to request the certificate or not

#  TLSRSACertificateFile    /etc/proftpd/ssl.crt          # SSL certfile

#  TLSRSACertificateKeyFile /etc/proftpd/ssl.key          # SSL keyfile

#  TLSVerifyClient          off                           # client verification

#</IfModule>

#

# ISPCP Quota management;

#

<IfModule mod_quotatab.c>

  QuotaEngine              on

  QuotaShowQuotas          on

  QuotaDisplayUnits        Mb

  SQLNamedQuery            get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"

  SQLNamedQuery            get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"

  SQLNamedQuery            update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies

  SQLNamedQuery            insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

  QuotaLock                /var/run/proftpd/tally.lock

  QuotaLimitTable          sql:/get-quota-limit

  QuotaTallyTable          sql:/get-quota-tally/update-quota-tally/insert-quota-tally

</IfModule>

<IfModule mod_ratio.c>

  Ratios                   on

</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in

# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02

# It is on by default.

<IfModule mod_delay.c>

  DelayEngine              on

</IfModule>

<IfModule mod_ctrls.c>

  ControlsEngine           on

  ControlsMaxClients       2

  ControlsLog              /var/log/proftpd/controls.log

  ControlsInterval         5

  ControlsSocket           /var/run/proftpd/proftpd.sock

</IfModule>

<IfModule mod_ctrls_admin.c>

  AdminControlsEngine      on

</IfModule>

# ispCP SQL Managment

SQLBackend                 mysql

SQLAuthTypes               Crypt

SQLAuthenticate            on

SQLConnectInfo             ispcp@localhost user pass

SQLUserInfo                ftp_users userid passwd uid gid homedir shell

SQLGroupInfo               ftp_group groupname gid members

SQLMinUserUID              2000

SQLMinUserGID              2000

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>

#   User                   ftp

#   Group                  nogroup

#   # We want clients to be able to login with "anonymous" as well as "ftp"

#   UserAlias              anonymous ftp

#   # Cosmetic changes, all files belongs to ftp user

#   DirFakeUser            on ftp

#   DirFakeGroup           on ftp

#

#   RequireValidShell      off

#

#   # Limit the maximum number of anonymous logins

#   MaxClients             10

#

#   # We want 'welcome.msg' displayed at login, and '.message' displayed

#   # in each newly chdired directory.

#   DisplayLogin           welcome.msg

#   DisplayFirstChdir      .message

#

#   # Limit WRITE everywhere in the anonymous chroot

#   <Directory *>

#     <Limit WRITE>

#       DenyAll

#     </Limit>

#   </Directory>

#

#   # Uncomment this if you're brave.

#   # <Directory incoming>

#   #   # Umask 022 is a good standard umask to prevent new files and dirs

#   #   # (second parm) from being group and world writable.

#   #   Umask              022  022

#   #   <Limit READ WRITE>

#   #     DenyAll

#   #   </Limit>

#   #   <Limit STOR>

#   #     AllowAll

#   #   </Limit>

#   # </Directory>

#

# </Anonymous>

Include /etc/proftpd/ispcp/*

scc · 11-05-2009 10:11 PM

Конфиг у меня такой же ,за исключением адресную детективу добавил.

Threaded Mode \| Linear Mode proftpd
Author	Message