proftpd

[scc]

Воопщем панель поставил из ночной сборки версия 1.03.
При прочитаных здесь изменениях потправил конфиг , но в итоге так и не заходит по фтп.Фаервол ненастроен. Система

Code:

web:/home/sc# uname -a
Debian Linux web 2.6.26-2-686 #1 SMP Sat Oct 17 17:59:23 UTC 2009 i686 GNU/Linux

Code:

/home/sc# proftpd -t
Checking syntax of configuration file
- setting default address to 192.168.2.2
- processing configuration directory '/etc/proftpd/ispcp'
Syntax check complete.

Code:

web:/home/sc# ps awx | grep proftpd
3319 ?        Ss     0:00 proftpd: (accepting connections)
18284 pts/1    R+     0:00 grep proftpd

Code:

/home/sc# /usr/sbin/proftpd -l
Compiled-in modules:
  mod_core.c
  mod_xfer.c
  mod_auth_unix.c
  mod_auth_file.c
  mod_auth.c
  mod_ls.c
  mod_log.c
  mod_site.c
  mod_delay.c
  mod_dso.c
  mod_auth_pam.c
  mod_readme.c
  mod_cap.c
  mod_ctrls.c
  mod_lang.c

сам конфиг /etc/proftpd/proftpd.conf

Code:

# Includes DSO modules (this is mandatory in proftpd 1.3)
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6                    off

ServerName                 "ftp.local.ru"
ServerType                 standalone
DeferWelcome               off

MultilineRFC2228           on
DefaultServer              on
ShowSymlinks               on

AllowOverwrite             on
UseReverseDNS              off
IdentLookups               off
AllowStoreRestart          on
AllowForeignAddress        on

LogFormat                  traff "%b %u"

TimeoutLogin               120
TimeoutNoTransfer          600
TimeoutStalled             600
TimeoutIdle                1200

#DisplayLogin               welcome.msg
#DisplayChdir          message
DefaultAddress        192.168.2.2
ListOptions                "-l"
#LsDefaultOptions           "-l"

DenyFilter                 \*.*/

DefaultRoot                ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd         off

# Port 21 is the standard FTP port.
Port                       21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
#PassivePorts               49152 65534

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances               30

# Set the user and group that the server normally runs at.
User                       nobody
Group                      nogroup

В чем может быть еще ошибка подскажите пожайлуста.