[HowTo] Password Change Roundcube 0.5 (and 0.4.2)

[Sweil]

Ok just for the record, we have 2 different problems here:

1. Status is set to 'change', after password change but new password doesn't work
2. Status is set to 'crypt_md5_data() | [ERROR] Undefined input data, data: || !' and new password doesn't work
   

For those getting the first error: I guess your running the ispcp daemon under an non-default-port or the protocol of the daemon isn't correct (e.g. by using an other ispcp-version). So pls tell me your ispcp-version, your OS and the daemon-port. You may also try to connect to the daemon via telnet. You should see some effect after this conversation:

Code:

<<telnet localhost 9876 [connecting to ispcp-daemon]
>>Trying 127.0.0.1...
>>Connected to localhost.localdomain.
[You are now talking with the daemon]
>>250 OK ispCP Daemon v1.1 Welcomes You!
<<helo 1.0.7
>>250 OK 127.0.0.1/1.0.7
<<execute query
>>250 OK request is being processed.
<<bye
>>250 OK Good Bye!
[you are not longer talking to daemon]
>>Connection closed by foreign host. [telnet message]

>> Daemon Output
<< User Input
[text] Note, don't type this into PuTTY


For those getting the second error:

It is most likely an error within the password encryption. First option, for some reasons (I don't know) the function works different on your system; second option, you have a typo in KEY or IV.

So pls triple-check KEY and IV. After this compare the entries in mail_users->mail_pass after setting a new pw with roundcube and ispCP-Admin-Panel. I must be exactly the same.


PS: As I'm not getting one of this errors, I need your help to locate and fix them.