Current time: 07-05-2024, 03:28 PM Hello There, Guest! (LoginRegister)


Post Reply 
email versenden via Outlook funktioniert nicht
Author Message
renew Offline
Newbie
*

Posts: 5
Joined: Dec 2010
Reputation: 0
Post: #1
Question email versenden via Outlook funktioniert nicht
Hallo,
Ich habe ein Problem mit dem versenden von emails via. Outlook (und anderen). Per webmailer funktioniert alles wunderbar aber sobald ich probiere mit einer Software einen email-konto einzurichten schlägt hier der emailversand (SMTP) fehl. Ich denke ich habe alles richtig gemacht:
Als POP3 und SMTP habe ich zwei varianten versucht: mail.domain.tld (natürlich mit der richtigen Domain) und 46.182.19.127 (IP des vservers)

*requires authentication (SMTP) -> Benutze gleiche settings wie incoming mail server

Die Fehlermeldung in Outlook ist immer die selbe:
Send test e-mail message: The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).

Technische Daten:
vServer - Debian 5.0 + ISPCP 1.0.0 - 64 Bit
ispCP 1.0.0 OMEGA, build: 20090225, Codename: Priamos (vorinstalliert vom Provider nbiServ)

Logs:
mail.log
Code:
Feb 21 08:32:01 vadmin683 postfix/smtpd[5859]: lost connection after RCPT from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:32:01 vadmin683 postfix/smtpd[5859]: disconnect from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:33:51 vadmin683 pop3d: Connection, ip=[::ffff:84.56.60.43]
Feb 21 08:33:51 vadmin683 pop3d: LOGIN FAILED, user=haefner@n4design.de, ip=[::ffff:84.56.60.43]
Feb 21 08:33:57 vadmin683 pop3d: Disconnected, ip=[::ffff:84.56.60.43]
Feb 21 08:35:21 vadmin683 postfix/anvil[5860]: statistics: max connection rate 1/60s for (smtp:93.231.156.160) at Feb 21 08:32:01
Feb 21 08:35:21 vadmin683 postfix/anvil[5860]: statistics: max connection count 1 for (smtp:93.231.156.160) at Feb 21 08:32:01
Feb 21 08:35:21 vadmin683 postfix/anvil[5860]: statistics: max cache size 1 at Feb 21 08:32:01
Feb 21 08:37:48 vadmin683 pop3d: Connection, ip=[::ffff:80.187.100.100]
Feb 21 08:37:48 vadmin683 pop3d: LOGIN, user=info@hno-zeller.de, ip=[::ffff:80.187.100.100], port=[42540]
Feb 21 08:37:49 vadmin683 pop3d: LOGOUT, user=info@hno-zeller.de, ip=[::ffff:80.187.100.100], port=[42540], top=0, retr=0, rcvd=18, sent=47, time=1
Feb 21 08:39:31 vadmin683 pop3d: Connection, ip=[::ffff:93.231.156.160]
Feb 21 08:39:32 vadmin683 pop3d: LOGIN, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60390]
Feb 21 08:39:32 vadmin683 pop3d: LOGOUT, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60390], top=0, retr=0, rcvd=12, sent=39, time=0
Feb 21 08:39:32 vadmin683 postfix/smtpd[5875]: connect from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:39:32 vadmin683 postfix/smtpd[5875]: NOQUEUE: reject: RCPT from p5DE79CA0.dip.t-dialin.net[93.231.156.160]: 504 5.5.2 <PCPC>: Helo command rejected: need fully-qualified hostname; from=<test@hno-zeller.de> to=<test@hno-zeller.de> proto=ESMTP helo=<PCPC>
Feb 21 08:39:32 vadmin683 postfix/smtpd[5875]: lost connection after RCPT from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:39:32 vadmin683 postfix/smtpd[5875]: disconnect from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:39:41 vadmin683 pop3d: Connection, ip=[::ffff:93.231.156.160]
Feb 21 08:39:41 vadmin683 pop3d: LOGIN, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60392]
Feb 21 08:39:42 vadmin683 pop3d: LOGOUT, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60392], top=0, retr=0, rcvd=12, sent=39, time=1
Feb 21 08:39:42 vadmin683 postfix/smtpd[5875]: connect from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:39:42 vadmin683 postfix/smtpd[5875]: warning: p5DE79CA0.dip.t-dialin.net[93.231.156.160]: SASL NTLM authentication aborted
Feb 21 08:39:42 vadmin683 postfix/smtpd[5875]: warning: SASL authentication failure: required parameters missing
Feb 21 08:39:42 vadmin683 postfix/master[5741]: warning: process /usr/lib/postfix/smtpd pid 5875 killed by signal 11
Feb 21 08:40:02 vadmin683 pop3d: Connection, ip=[::ffff:93.231.156.160]
Feb 21 08:40:02 vadmin683 pop3d: LOGIN, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60396]
Feb 21 08:40:02 vadmin683 pop3d: LOGOUT, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60396], top=0, retr=0, rcvd=12, sent=39, time=0
Feb 21 08:40:02 vadmin683 postfix/smtpd[5882]: connect from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:40:03 vadmin683 postfix/smtpd[5882]: warning: p5DE79CA0.dip.t-dialin.net[93.231.156.160]: SASL NTLM authentication aborted
Feb 21 08:40:03 vadmin683 postfix/smtpd[5882]: warning: SASL authentication failure: required parameters missing
Feb 21 08:40:03 vadmin683 postfix/master[5741]: warning: process /usr/lib/postfix/smtpd pid 5882 killed by signal 11
Feb 21 08:40:03 vadmin683 postfix/master[5741]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling
Feb 21 08:41:43 vadmin683 postfix/anvil[5876]: statistics: max connection rate 3/60s for (smtp:93.231.156.160) at Feb 21 08:40:02
Feb 21 08:41:43 vadmin683 postfix/anvil[5876]: statistics: max connection count 1 for (smtp:93.231.156.160) at Feb 21 08:39:32
Feb 21 08:41:43 vadmin683 postfix/anvil[5876]: statistics: max cache size 1 at Feb 21 08:39:32
Feb 21 08:51:37 vadmin683 pop3d: Connection, ip=[::ffff:93.231.156.160]
Feb 21 08:51:37 vadmin683 pop3d: LOGIN, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60555]
Feb 21 08:51:37 vadmin683 pop3d: LOGOUT, user=test@hno-zeller.de, ip=[::ffff:93.231.156.160], port=[60555], top=0, retr=0, rcvd=12, sent=39, time=0
Feb 21 08:51:37 vadmin683 postfix/smtpd[5889]: connect from p5DE79CA0.dip.t-dialin.net[93.231.156.160]
Feb 21 08:51:38 vadmin683 postfix/smtpd[5889]: warning: p5DE79CA0.dip.t-dialin.net[93.231.156.160]: SASL NTLM authentication aborted
Feb 21 08:51:38 vadmin683 postfix/smtpd[5889]: warning: SASL authentication failure: required parameters missing
Feb 21 08:51:38 vadmin683 postfix/master[5741]: warning: process /usr/lib/postfix/smtpd pid 5889 killed by signal 11
Feb 21 08:51:38 vadmin683 postfix/master[5741]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling
Feb 21 08:53:18 vadmin683 postfix/anvil[5890]: statistics: max connection rate 1/60s for (smtp:93.231.156.160) at Feb 21 08:51:37
Feb 21 08:53:18 vadmin683 postfix/anvil[5890]: statistics: max connection count 1 for (smtp:93.231.156.160) at Feb 21 08:51:37
Feb 21 08:53:18 vadmin683 postfix/anvil[5890]: statistics: max cache size 1 at Feb 21 08:51:37

die mail.err ist leer.

Weiß einer wo hier der Fehler liegt?

Viele Grüße,
Rene
02-21-2011 06:05 PM
Find all posts by this user Quote this message in a reply
Knut Offline
Member
***

Posts: 736
Joined: Nov 2006
Reputation: 10
Post: #2
RE: email versenden via Outlook funktioniert nicht
Das wurde hier schon sehr oft besprochen.
Suche einfach mal nach Outlook 2010, da sollte schon ein Treffer dabei sein.

EDIT: Ups... anderer Fehler. Im Log sieht es aber nach einen SASL Fehler aus. Klappt es denn mit einem anderen Mailer ?

Knut
(This post was last modified: 02-21-2011 06:12 PM by Knut.)
02-21-2011 06:10 PM
Find all posts by this user Quote this message in a reply
renew Offline
Newbie
*

Posts: 5
Joined: Dec 2010
Reputation: 0
Post: #3
RE: email versenden via Outlook funktioniert nicht
Oh man, fehler gefunden.
Ich habe Stunden in Google nach einer lösung gesucht und als letztes hier ein Thread verfasst und nun finde ich den fehler dank deinem kleinen Hinweis SASL Tongue

Ausführen und es funktioniert:
Code:
echo -e "mech_list: plain login" >> /etc/postfix/sasl/smtpd.conf
/etc/init.d/postfix force-reload
(This post was last modified: 02-21-2011 06:20 PM by renew.)
02-21-2011 06:16 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)