Relay problems after upgrade to RC5

[hendry]

I just upgraded to RC5 because of some problems with RC4. Everything went ok without errors, but now all mail is getting bounced:

Quote:Technical details of permanent failure:

PERM_FAILURE: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <hendry@xxx.nl>: Relay access denied (state 14).

Where to look? It looks like the emailaddresses of ISPCP are unknown now for Postfix. My Postfix config looks like:

Quote:#
# Postfix MTA Manager Main Configuration File;
#
# Please do NOT edit this file manually;
#

#
# Postfix directory settings; These are critical for normal Postfix MTA functionallity;
#

command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
program_directory = /usr/lib/postfix

#
# Some common configuration parameters;
#

inet_interfaces = all
mynetworks_style = host

myhostname = websiteondersteuning.nl
mydomain = websiteondersteuning.nl.local
myorigin = $mydomain

smtpd_banner = $myhostname ISPCP 1.0 Priamos Managed ESMTP 1.0.0 RC5 OMEGA
setgid_group = postdrop

#
# Receiving messages parameters;
#

mydestination = $myhostname, $mydomain
append_dot_mydomain = no
append_at_myorigin = yes
local_transport = local
virtual_transport = virtual
transport_maps = hash:/etc/postfix/ispcp/transport

#
# Delivering local messages parameters;
#

mail_spool_directory = /var/mail

# Mailboxquota
# => 0 for unlimited
# => 104857600 for 100 MB
mailbox_size_limit = 0
mailbox_command = procmail -a "$EXTENSION"

biff = no

alias_database = hash:/etc/aliases

local_destination_recipient_limit = 1
local_recipient_maps = unix:passwd.byname $alias_database

#
# ISPCP Autoresponder parameters;
#

ispcp-arpl_destination_recipient_limit = 1

#
# Delivering virtual messages parameters;
#

virtual_mailbox_base = /var/mail/virtual
virtual_mailbox_limit = 0

virtual_mailbox_domains = hash:/etc/postfix/ispcp/domains
virtual_mailbox_maps = hash:/etc/postfix/ispcp/mailboxes

virtual_alias_maps = hash:/etc/postfix/ispcp/aliases

virtual_minimum_uid = 1000
virtual_uid_maps = static:1000
virtual_gid_maps = static:8

#
# SASL paramters;
#

smtpd_sasl_auth_enable = yes
smtpd_sasl2_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain =
broken_sasl_auth_clients = yes
smtpd_sender_restrictions = permit_mynetworks,
permit_sasl_authenticated,
reject_unauth_destination
smtpd_recipient_restrictions = permit_mynetworks,
permit_sasl_authenticated,
reject_unauth_destination
check_policy_service inet:127.0.0.1:60000


#
# TLS parameters; activate, if avaible/used
#

#smtpd_tld_loglevel = 2
#smtpd_tls_cert_file = /etc/postfix/cert.pem
#smtpd_tls_key_file = /etc/postfix/privkey.pem
#smtpd_use_tls = yes
#smtpd_tls_auth_only = no
#smtpd_tls_received_header = yes


#
# AMaViS parameters; activate, if avaible/used
#

content_filter = amavis:[127.0.0.1]:10024

#
# Quota support; activate, if avaible/used
#

#virtual_create_maildirsize = yes
#virtual_mailbox_extended = yes
#virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf
#virtual_mailbox_limit_override = yes
#virtual_maildir_limit_message = "The user you're trying to reach is over mailbox quota."
#virtual_overquota_bounce = yes

Where to look now? I'm also running Maia

[hendry]

Wich configs are active btw? can it be in /etc/ispcp/postfix? Is there a way to regenerate all configs for postfix so that aliases are created again? Posted config was in /etc/postfix. The /etc/ispcp/postfix looks like this:

Quote:#
# ispCP ω (OMEGA) a Virtual Hosting Control System
#
# @copyright 2001-2006 by moleSoftware GmbH
# @copyright 2006-2008 by ispCP | http://isp-control.net
# @version SVN: $ID$
# @link http://isp-control.net
# @author ispCP Team
#
# @license
# This program is free software; you can redistribute it and/or modify it under
# the terms of the MPL General Public License as published by the Free Software
# Foundation; either version 1.1 of the License, or (at your option) any later
# version.
# You should have received a copy of the MPL Mozilla Public License along with
# this program; if not, write to the Open Source Initiative (OSI)
# http://opensource.org | osi@opensource.org
#
################################################################################​

# Postfix directory settings; These are critical for normal Postfix MTA functionallity
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix

# Some common configuration parameters
inet_interfaces = all
mynetworks_style = host

myhostname = {MTA_HOSTNAME}
mydomain = {MTA_LOCAL_DOMAIN}
myorigin = $myhostname

smtpd_banner = $myhostname ESMTP ispCP {MTA_VERSION} Managed
setgid_group = postdrop

# Receiving messages parameters
mydestination = $myhostname, $mydomain
append_dot_mydomain = no
append_at_myorigin = yes
local_transport = local
virtual_transport = virtual
transport_maps = hash:{MTA_TRANSPORT_HASH}
alias_maps = hash:{MTA_LOCAL_ALIAS_HASH}
alias_database = hash:{MTA_LOCAL_ALIAS_HASH}

# Delivering local messages parameters
mail_spool_directory = {MTA_LOCAL_MAIL_DIR}

# Mailboxquota
# => 0 for unlimited
# => 104857600 for 100 MB
mailbox_size_limit = 0
mailbox_command = procmail -a "$EXTENSION"

biff = no
recipient_delimiter = +

local_destination_recipient_limit = 1
local_recipient_maps = unix:passwd.byname $alias_database

# ispCP Autoresponder parameters
ispcp-arpl_destination_recipient_limit = 1

# Delivering virtual messages parameters
virtual_mailbox_base = {MTA_VIRTUAL_MAIL_DIR}
virtual_mailbox_limit = 0

virtual_mailbox_domains = hash:{MTA_VIRTUAL_DMN_HASH}
virtual_mailbox_maps = hash:{MTA_VIRTUAL_MAILBOX_HASH}

virtual_alias_maps = hash:{MTA_VIRTUAL_ALIAS_HASH}

virtual_minimum_uid = {MTA_MAILBOX_MIN_UID}
virtual_uid_maps = static:{MTA_MAILBOX_UID}
virtual_gid_maps = static:{MTA_MAILBOX_GID}

# SASL paramters
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain =
broken_sasl_auth_clients = yes

smtpd_helo_required = yes

smtpd_helo_restrictions = permit_mynetworks,
permit_sasl_authenticated,
reject_invalid_helo_hostname,
reject_non_fqdn_helo_hostname

smtpd_sender_restrictions = reject_non_fqdn_sender,
reject_unknown_sender_domain,
permit_mynetworks,
permit_sasl_authenticated

smtpd_recipient_restrictions = reject_non_fqdn_recipient,
reject_unknown_recipient_domain,
permit_mynetworks,
permit_sasl_authenticated,
reject_unauth_destination,
reject_unlisted_recipient,
check_policy_service inet:127.0.0.1:12525,
check_policy_service inet:127.0.0.1:60000,
permit

smtpd_data_restrictions = reject_multi_recipient_bounce,
reject_unauth_pipelining

# TLS parameters; activate, if avaible/used
#smtpd_use_tls = yes
#smtpd_tls_loglevel = 2
#smtpd_tls_cert_file = /etc/postfix/cert.pem
#smtpd_tls_key_file = /etc/postfix/privkey.pem
#smtpd_tls_auth_only = no
#smtpd_tls_received_header = yes

# AMaViS parameters; activate, if available/used
#content_filter = amavis:[127.0.0.1]:10024

# Quota support; activate, if available/used
#virtual_create_maildirsize = yes
#virtual_mailbox_extended = yes
#virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf
#virtual_mailbox_limit_override = yes
#virtual_maildir_limit_message = "The user you're trying to reach is over mailbox quota."
#virtual_overquota_bounce = yes

[hendry]

gutek Wrote:as root in mysql
UPDATE domain SET domain_status = 'change' WHERE domain_status = 'ok';
UPDATE mail_users SET status = 'change' WHERE status = 'ok';

an then on shell
/var/www/ispcp/engine/ispcp-rqst-mngr

Trying it now to see how this works

[hendry]

Ok, this works. When testing I also found that subdomains and aliases are not working anymore. After doing the same trick as stated above these are also working again. Can anyone tell me what the reason is that this all isn't working anymore after upgrading from RC4 to RC5?

[RatS]

postfix infos are changed; I've fixed the update script; sorry for this, but no one wanted to test it ...

[hendry]

Ok, thanx for the reply. Do I have to run some scripts after upgrading to RC5 or am I ready now?

[sci2tech]

Hope it help: http://www.isp-control.net/ispcp/ticket/1348
@hendry you can restart update procedure. Or in this stage all you have to do is restart services

[RatS]

no, you have to set all domains, aliasdomains, subdomains and email_users to "change" and run ispcp-rqst-mngr!

Fix will be added tomorrow in new packages.

[DaSilva]

I used the first uploaded version of RC5 with an upgrade from RC4.
"domains, aliasdomains, subdomains and email_users to "change" and run ispcp-rqst-mngr" is done also.
Must I do something else?

[RatS]

no, I found nothing else