Current time: 12-08-2021, 04:02 PM Hello There, Guest! (LoginRegister)


Post Reply 
[solved]Bind9 - działa ale nie działa
Author Message
Ruthwen Offline


Posts: 3
Joined: May 2011
Reputation: 0
Post: #1
[solved]Bind9 - działa ale nie działa
Witam.
Mama taki problem z dnsem, dodałem sobie przykładową domenę: mojadomena.kom:
Code:
$TTL 12H
$ORIGIN mojadomena.kom.
@               IN              SOA             ns1.mojadomena.kom. postmaster.mojadomena.kom. (
; dmn [mojadomena.kom] timestamp entry BEGIN.
                2011051503      ; Serial
; dmn [mojadomena.kom] timestamp entry END.
                8H              ; Refresh
                2H              ; Retry
                7D              ; Expire
                1D              ; Minimum TTL
)
                IN              NS              ns1.mojadomena.kom.
                IN              NS              ns2.mojadomena.kom.
                IN              MX      10      mail.mojadomena.kom.

mojadomena.kom.     IN              A               xx.xx.xx.xx
www             IN              A               xx.xx.xx.xx
mojadomena.kom.     IN              TXT             "v=spf1 a mx ip4:xx.xx.xx.xx ip4:xx.xx.xx.xx ~all"
localhost       IN              A               127.0.0.1
mail            IN              A               xx.xx.xx.xx
ns1             IN              A               xx.xx.xx.xx
ns2             IN              A               xx.xx.xx.xx
; CNAME for VHCS compatibility
ns              IN              CNAME           ns1
; CNAME for mail transfer
imap            IN              CNAME           mail
pop             IN              CNAME           mail
pop3            IN              CNAME           mail
relay           IN              CNAME           mail
smtp            IN              CNAME           mail
; CNAME for web transfer
ftp             IN              CNAME           www

; sub [{SUB_NAME}] entry BEGIN.
; sub [{SUB_NAME}] entry END.
Bind podobno działa:
Code:
bind9 is running.
netstat:
Code:
tcp        0      0 127.0.0.1:953           0.0.0.0:*               LISTEN      17750/named
tcp        0      0 127.0.0.1:53            0.0.0.0:*               LISTEN      17750/named
tcp6       0      0 ::1:953                 :::*                    LISTEN      17750/named
tcp6       0      0 ::1:53                  :::*                    LISTEN      17750/named
Firewalla na chwilę obecną tam nie ma żadnego.
W panelu widzę coś takiego jak w załączniku, natomiast jak próbuję na serwerze rozwiązać tamtą domenę to widzę coś takiego:
Code:
nslookup
> server 127.0.0.1
Default server: 127.0.0.1
Address: 127.0.0.1#53
> mojadomena.kom
Server:         127.0.0.1
Address:        127.0.0.1#53

** server can't find mojadomena.kom: SERVFAIL
Tak wygląda log restartu bind-a:
Code:
May 16 12:29:59 mojhost named[30674]: shutting down
May 16 12:29:59 mojhost named[30674]: no longer listening on 127.0.0.1#53
May 16 12:29:59 mojhost named[30674]: no longer listening on ::1#53
May 16 12:29:59 mojhost named[30674]: exiting
May 16 12:30:00 mojhost named[17750]: starting BIND 9.7.3 -u bind
May 16 12:30:00 mojhost named[17750]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=' 'CPPFLAGS='
May 16 12:30:00 mojhost named[17750]: adjusted limit on open files from 1024 to 1048576
May 16 12:30:00 mojhost named[17750]: found 2 CPUs, using 2 worker threads
May 16 12:30:00 mojhost named[17750]: using up to 4096 sockets
May 16 12:30:00 mojhost named[17750]: loading configuration from '/etc/bind/named.conf'
May 16 12:30:00 mojhost named[17750]: reading built-in trusted keys from file '/etc/bind/bind.keys'
May 16 12:30:00 mojhost named[17750]: using default UDP/IPv4 port range: [1024, 65535]
May 16 12:30:00 mojhost named[17750]: using default UDP/IPv6 port range: [1024, 65535]
May 16 12:30:00 mojhost named[17750]: listening on IPv4 interface lo, 127.0.0.1#53
May 16 12:30:00 mojhost named[17750]: listening on IPv6 interface lo, ::1#53
May 16 12:30:00 mojhost named[17750]: generating session key for dynamic DNS
May 16 12:30:00 mojhost named[17750]: set up managed keys zone for view _default, file 'managed-keys.bind'
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 254.169.IN-ADDR.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 100.51.198.IN-ADDR.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 113.0.203.IN-ADDR.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: D.F.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 8.E.F.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 9.E.F.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: A.E.F.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: B.E.F.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA
May 16 12:30:00 mojhost named[17750]: command channel listening on 127.0.0.1#953
May 16 12:30:00 mojhost named[17750]: command channel listening on ::1#953
May 16 12:30:00 mojhost named[17750]: the working directory is not writable
May 16 12:30:00 mojhost named[17750]: zone 0.in-addr.arpa/IN: loaded serial 1
May 16 12:30:00 mojhost named[17750]: zone 127.in-addr.arpa/IN: loaded serial 1
May 16 12:30:00 mojhost named[17750]: zone 255.in-addr.arpa/IN: loaded serial 1
May 16 12:30:00 mojhost named[17750]: zone localhost/IN: loaded serial 2
May 16 12:30:00 mojhost named[17750]: zone mojadomena.kom/IN: loaded serial 2011051602
May 16 12:30:00 mojhost named[17750]: managed-keys-zone ./IN: loading from master file managed-keys.bind failed: file not found
May 16 12:30:00 mojhost named[17750]: managed-keys-zone ./IN: loaded serial 0
May 16 12:30:00 mojhost named[17750]: zone mojadomena.kom/IN: sending notifies (serial 2011051602)
May 16 12:30:00 mojhost named[17750]: running
Zakładam, że to o to chodzi:
Code:
May 16 12:30:00 mojhost named[17750]: managed-keys-zone ./IN: loading from master file managed-keys.bind failed: file not found
May 16 12:30:00 mojhost named[17750]: managed-keys-zone ./IN: loaded serial 0
Tylko teraz pytanie jak się tego pozbyć.
Stworzyłem plik managed-keys.bind i obecnie mam w logach:
Code:
managed-keys-zone ./IN: loaded serial 0
Ale to nic nie zmieniło.

//pogrzebałem głębiej w ustawieniach binda, już działa jak trzeba


Attached File(s) Thumbnail(s)
   
(This post was last modified: 06-07-2011 10:53 PM by Ruthwen.)
05-16-2011 09:01 PM
Find all posts by this user Quote this message in a reply
jakub.artur Offline
Junior Member
*

Posts: 30
Joined: Sep 2010
Reputation: 0
Post: #2
RE: [solved]Bind9 - działa ale nie działa
dodaj w bind conf listen ip twojego servera bo jest na pewno 127.0.0.1
06-26-2011 04:50 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)