Threaded Mode | Linear Mode

obey · 07-09-2008 09:18 PM

hi,

ich hab gleich mal 2 postfix probleme:

1. geht es um einen centOS rhel5 server. nach der (ohnehin sehr schwierigen) installation von rc4 bekam ich im quirrelmail den fehler, dass eine mail nicht verschickt werden konnte, weil kein smtp laufen würde.
kurz gecheckt: port 25 war zu. postfix liess sich aber auch nicht starten.
in der main.cf habe ich dann das daemon_directory und das
program_directory auf /usr/libexec/postfix geändert. danach liess sich wenigstens der postfix starten.
wenn ich aber jetzt etwas aus dem webmail verschicken will, rödelt der ewig rum und kommt mir dann mit: message has not been sent. Ohne weitere Erklärung. Das error.log sagt folgendes:

Code:

[Wed Jul 09 09:57:20 2008] [error] [client 127.0.0.1] script not found or unable to stat: /usr/lib/cgi-bin, referer: http://admin1.interfrog.de/client/webtools.php

Hat da vll noch jemand eine idee was genau da zerschossen ist?

mein 2. prob:
auf einem debian etch server verlief die installation sehr viel problemloser als auf dem centOS. Hier funktioniert soweit alles, nur ein Problem tritt auf:
Wenn ich versuche über den mailclient (in diesem fall thunderbird) etwas zu schicken, wird mein passwort nicht angenommen. Überall sonst schon.
Im log stehen:

Code:

Jul  9 13:11:19 obey postfix/smtpd[7181]: warning: SASL authentication failure: no secret in database

Jul  9 13:11:19 obey postfix/smtpd[7181]: warning: u2-61.dsl.vianetworks.de[194.231.192.61]: SASL CRAM-MD5 authentication failed: authentication failure

Jul  9 13:11:19 obey postfix/smtpd[7181]: warning: SASL authentication failure: Password verification failed

Jul  9 13:11:19 obey postfix/smtpd[7181]: warning: u2-61.dsl.vianetworks.de[194.231.192.61]: SASL PLAIN authentication failed: authentication failure

Jul  9 13:11:19 obey postfix/smtpd[7181]: warning: u2-61.dsl.vianetworks.de[194.231.192.61]: SASL LOGIN authentication failed: authentication failure

Ich weiss, dass es hier im forum schon einige posts gibt, die das thema behandeln, allerdings hat keine der lösungen bei mir gegriffen.
vor allem das

Code:

authentication failure: no secret in database

gibt mir zu denken. Wenn ihr irgendwelche configs braucht, einfach bescheid geben.

wäre klasse wenn da noch jemand ne idee hätte
gruss obey!

**ZooL** · 07-12-2008 05:19 AM

2. problem.. scheind irgendwo ein haken an der sasl problematic zu sein.. einfach mal
die confs checken... dies biete ich dir an auch zu tun..

mfg

obey · 07-14-2008 08:22 PM

ok, danke ...
main.cf:

Code:

# Postfix directory settings; These are critical for normal Postfix MTA functionallity

command_directory            = /usr/sbin

daemon_directory             = /usr/lib/postfix

program_directory            = /usr/lib/postfix

# Some common configuration parameters

inet_interfaces              = all

mynetworks_style             = host

myhostname                   = admin1.bitclique.de

mydomain                     = $myhostname

myorigin                     = $myhostname

smtpd_banner                 = $myhostname ESMTP ispCP 1.0.0 RC4 OMEGA Managed

setgid_group                 = postdrop

# Receiving messages parameters

mydestination                = $myhostname, $mydomain

append_dot_mydomain          = no

append_at_myorigin           = yes

local_transport              = local

virtual_transport            = virtual

transport_maps               = hash:/etc/postfix/ispcp/transport

alias_maps                   = hash:/etc/aliases

alias_database               = hash:/etc/aliases

# Delivering local messages parameters

mail_spool_directory         = /var/mail

# Mailboxquota

# => 0 for unlimited

# => 104857600 for 100 MB

mailbox_size_limit           = 0

mailbox_command              = procmail -a "$EXTENSION"

biff                         = no

recipient_delimiter          = +

local_destination_recipient_limit = 1

local_recipient_maps         = unix:passwd.byname $alias_database

# ispCP Autoresponder parameters

ispcp-arpl_destination_recipient_limit = 1

# Delivering virtual messages parameters

virtual_mailbox_base         = /var/mail/virtual

virtual_mailbox_limit        = 0

virtual_mailbox_domains      = hash:/etc/postfix/ispcp/domains

virtual_mailbox_maps         = hash:/etc/postfix/ispcp/mailboxes

virtual_alias_maps           = hash:/etc/postfix/ispcp/aliases

virtual_minimum_uid          = 1002

virtual_uid_maps             = static:1002

virtual_gid_maps             = static:8

# SASL paramters

smtpd_sasl_auth_enable       = yes

smtpd_sasl2_auth_enable      = yes

smtpd_sasl_security_options  = noanonymous

smtpd_sasl_local_domain      =

broken_sasl_auth_clients     = yes

smtpd_helo_required          = yes

smtpd_helo_restrictions      = permit_mynetworks,

                               permit_sasl_authenticated,

                               reject_invalid_helo_hostname,

                               reject_non_fqdn_helo_hostname

smtpd_sender_restrictions    = reject_non_fqdn_sender,

                               reject_unknown_sender_domain,

                               permit_mynetworks,

                               permit_sasl_authenticated

smtpd_recipient_restrictions = reject_non_fqdn_recipient,

                               reject_unknown_recipient_domain,

                               permit_mynetworks,

                               permit_sasl_authenticated,

                               reject_unauth_destination,

                               reject_unlisted_recipient,

                               check_policy_service inet:127.0.0.1:12525,

                               check_policy_service inet:127.0.0.1:60000,

                               permit

smtpd_data_restrictions      = reject_multi_recipient_bounce,

                               reject_unauth_pipelining

# TLS parameters; activate, if avaible/used

#smtpd_use_tls               = yes

#smtpd_tls_loglevel          = 2

#smtpd_tls_cert_file         = /etc/postfix/cert.pem

#smtpd_tls_key_file          = /etc/postfix/privkey.pem

#smtpd_tls_auth_only         = no

#smtpd_tls_received_header   = yes

# AMaViS parameters; activate, if available/used

#content_filter               = amavis:[127.0.0.1]:10024

# Quota support; activate, if available/used

#virtual_create_maildirsize     = yes

#virtual_mailbox_extended       = yes

#virtual_mailbox_limit_maps     = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf

#virtual_mailbox_limit_override = yes

#virtual_maildir_limit_message  = "The user you're trying to reach is over mailbox quota."

#virtual_overquota_bounce       = yes

master.cf

Code:

# Postfix master process configuration file.  For details on the format

# of the file, see the master(5) manual page (command: "man 5 master").

#

# ==========================================================================

# service type  private unpriv  chroot  wakeup  maxproc command + args

#               (yes)   (yes)   (yes)   (never) (100)

# ==========================================================================

smtp      inet  n       -       -       -       -       smtpd

#submission inet n       -       -       -       -       smtpd

#  -o smtpd_enforce_tls=yes

#  -o smtpd_sasl_auth_enable=yes

#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject

#smtps     inet  n       -       -       -       -       smtpd

#  -o smtpd_tls_wrappermode=yes

#  -o smtpd_sasl_auth_enable=yes

#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject

# For AOL-Accounts

587       inet  n       -       -       -       -       smtpd

        -o smtpd_client_restrictions=permit_sasl_authenticated,reject_unauth_destination

#628      inet  n       -       -       -       -       qmqpd

pickup    fifo  n       -       -       60      1       pickup

cleanup   unix  n       -       -       -       0       cleanup

qmgr      fifo  n       -       n       300     1       qmgr

#qmgr     fifo  n       -       -       300     1       oqmgr

tlsmgr    unix  -       -       -       1000?   1       tlsmgr

rewrite   unix  -       -       -       -       -       trivial-rewrite

bounce    unix  -       -       -       -       0       bounce

defer     unix  -       -       -       -       0       bounce

trace     unix  -       -       -       -       0       bounce

verify    unix  -       -       -       -       1       verify

flush     unix  n       -       -       1000?   0       flush

proxymap  unix  -       -       n       -       -       proxymap

smtp      unix  -       -       -       -       -       smtp

# When relaying mail as backup MX, disable fallback_relay to avoid MX loops

relay     unix  -       -       -       -       -       smtp

        -o fallback_relay=

#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5

showq     unix  n       -       -       -       -       showq

error     unix  -       -       -       -       -       error

discard   unix  -       -       -       -       -       discard

local     unix  -       n       n       -       -       local

virtual   unix  -       n       n       -       -       virtual

lmtp      unix  -       -       -       -       -       lmtp

anvil     unix  -       -       -       -       1       anvil

scache    unix  -       -       -       -       1       scache

# ====================================================================

# ispCP Ï (OMEGA) a Virtual Hosting Control System

#

# @copyright    2001-2006 by moleSoftware GmbH

# @copyright    2006-2008 by ispCP | http://isp-control.net

# @version              SVN: $ID$

# @link                 http://isp-control.net

# @author               ispCP Team

# ====================================================================

# AMaViS => Antivir / Antispam

amavis    unix  -       -       n       -       2       smtp

   -o smtp_data_done_timeout=1200

   -o smtp_send_xforward_command=yes

   -o disable_dns_lookups=yes

localhost:10025 inet  n -       n       -      -        smtpd

   -o content_filter=

   -o local_recipient_maps=

   -o relay_recipient_maps=

   -o smtpd_restriction_classes=

   -o smtpd_client_restrictions=

   -o smtpd_helo_restrictions=

   -o smtpd_sender_restrictions=

   -o smtpd_recipient_restrictions=permit_mynetworks,reject

   -o smtpd_override_options=no_address_mappings

   -o mynetworks=127.0.0.0/8

   -o strict_rfc821_envelopes=yes

# ispCP autoresponder

ispcp-arpl unix  -      n       n       -       -       pipe

  flags=O user=vmail argv=/var/www/ispcp/engine/messager/ispcp-arpl-msgr

# TLS - Activate, if TLS is avaiable/used

smtps     inet  n       -       -       -       -       smtpd

   -o smtpd_tls_wrappermode=yes

   -o smtpd_sasl_auth_enable=yes

#   -o smtpd_client_restrictions=permit_sasl_authenticated,reject

#

# ====================================================================

# Interfaces to non-Postfix software. Be sure to examine the manual

# pages of the non-Postfix software to find out what options it wants.

#

# Many of the following services use the Postfix pipe(8) delivery

# agent.  See the pipe(8) man page for information about ${recipient}

# and other message envelope options.

# ====================================================================

#

# maildrop. See the Postfix MAILDROP_README file for details.

# Also specify in main.cf: maildrop_destination_recipient_limit=1

#

maildrop  unix  -       n       n       -       -       pipe

  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}

#

# See the Postfix UUCP_README file for configuration details.

#

uucp      unix  -       n       n       -       -       pipe

  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)

#

# Other external delivery methods.

#

ifmail    unix  -       n       n       -       -       pipe

  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)

bsmtp     unix  -       n       n       -       -       pipe

  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient

scalemail-backend unix  -       n       n       -       2       pipe

  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}

mailman   unix  -       n       n       -       -       pipe

  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py

sasl/smtpd.conf

Code:

smtp_tls_session_cache_databaseeck_method: auxprop

auxprop_plugin: sql

mech_list: plain login cram-md5 digest-md5

sql_engine: mysql

sql_hostnames: localhost

sql_user: root

sql_passwd: xxxxxx

sql_database: ispcp

sql_select: select password from mail_users where email='%u@%r' = btree:${queue_directory}/smtp_scache

der user steht absichtlich auf root, da stand vorher als sql_user vhcs, was imho nicht wirklich stimmen kann Wink

Threaded Mode \| Linear Mode postfix probleme (gleich 2 server)
Author	Message