Dovecot

[coopa]

I have changed from courier to dovecot but the link to the file ispcp-dovecot-mngr no longer works! http://www.isp-control.net/forum/attachment.php?aid=830

Can someone point me in the correct direction for this file?

Cheers

[coopa]

I have found the file and placed it in the correct location, but it seems there are still files missing

Jan 10 23:02:12 nethost dovecot: imap-login: Login: user=<shaun@XXXXX.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jan 10 23:02:12 nethost dovecot: IMAP(shaun@XXXXX.co.uk): Disconnected: Logged out
Jan 10 23:02:14 nethost dovecot: imap-login: Login: user=<shaun@XXXXX.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jan 10 23:02:14 nethost dovecot: IMAP(shaun@XXXXX.co.uk): Disconnected: Logged out
Jan 10 23:02:35 nethost postfix/smtpd[4412]: connect from nethost.XXXXX.co.uk.local[127.0.0.1]
Jan 10 23:02:35 nethost postfix/smtpd[4412]: B47126FC1C9: client=nethost.XXXXX.co.uk.local[127.0.0.1]
Jan 10 23:02:35 nethost postfix/cleanup[4414]: B47126FC1C9: message-id=<849face5ea94a51f15ea25ce44597995.squirrel@admin.XXXXX.co.uk>
Jan 10 23:02:35 nethost postfix/qmgr[4364]: B47126FC1C9: from=<shaun@XXXXX.co.uk>, size=807, nrcpt=1 (queue active)
Jan 10 23:02:35 nethost postfix/smtpd[4412]: disconnect from nethost.XXXXX.co.uk.local[127.0.0.1]
Jan 10 23:02:36 nethost dovecot: imap-login: Login: user=<shaun@XXXXX.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jan 10 23:02:36 nethost postfix/smtp[4415]: B47126FC1C9: to=<shaun@xxx-ne.co.uk>, relay=mailserver.xxx-ne.co.uk[213.171.216.66]:25, delay=0.37, delays=0.08/0.05/0.16/0.08, dsn=5.0.0, status=bounced (host mailserver.xxx-ne.co.uk[213.171.216.66] said: 550 <shaun@XXXXX.co.uk>: Sender address rejected: Domain not found (in reply to RCPT TO command))
Jan 10 23:02:36 nethost postfix/cleanup[4414]: 19B366FC1CB: message-id=<20100110230236.19B366FC1CB@nethost.XXXXX.co.uk>
Jan 10 23:02:36 nethost postfix/bounce[4419]: B47126FC1C9: sender non-delivery notification: 19B366FC1CB
Jan 10 23:02:36 nethost postfix/qmgr[4364]: 19B366FC1CB: from=<>, size=2973, nrcpt=1 (queue active)
Jan 10 23:02:36 nethost postfix/qmgr[4364]: B47126FC1C9: removed
Jan 10 23:02:36 nethost pipe[4421]: fatal: pipe_command: execvp /usr/local/libexec/dovecot/deliver: No such file or directory
Jan 10 23:02:36 nethost dovecot: IMAP(shaun@XXXXX.co.uk): Disconnected: Logged out
Jan 10 23:02:36 nethost postfix/pipe[4420]: 19B366FC1CB: to=<shaun@XXXXX.co.uk>, relay=dovecot, delay=0.04, delays=0.01/0.01/0/0.02, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/local/libexec/dovecot/deliver: No such file or directory )
Jan 10 23:02:36 nethost dovecot: imap-login: Login: user=<shaun@XXXXX.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
Jan 10 23:02:36 nethost dovecot: IMAP(shaun@XXXXX.co.uk): Disconnected: Logged out

Any ideas?

[aseques]

Ups, when updating the link, just forgot to update the link in the wiki, the correct attachment is the one in this post:
http://www.isp-control.net/forum/thread-...49018.html

For the error you are posting it seems that you are using the *BSD config for postfix's master.cf (/usr/local/libexec/dovecot/deliver), but if you are on Linux, this is probably on /usr/lib/dovecot/deliver.
In any case just look at where is "deliver" and adapt master.cf accordingly

[coopa]

(01-11-2010 06:49 PM)aseques Wrote:  Ups, when updating the link, just forgot to update the link in the wiki, the correct attachment is the one in this post:
http://www.isp-control.net/forum/thread-...49018.html

For the error you are posting it seems that you are using the *BSD config for postfix's master.cf (/usr/local/libexec/dovecot/deliver), but if you are on Linux, this is probably on /usr/lib/dovecot/deliver.
In any case just look at where is "deliver" and adapt master.cf accordingly

Hi Aseques,

I have done what you said but for some reason the -s within:-
dovecot unix - n n - - pipe
flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient} -s

gives the following error:-

Jan 10 23:43:24 nethost postfix/pipe[5164]: E24226FC1CA: to=<shaun@XXXXX.co.uk>, relay=dovecot, delay=0.02, delays=0.01/0.01/0/0.01, dsn=5.3.0, status=bounced (command line usage error. Command output: Fatal: Unknown argument: -s Usage: deliver [-c <config file>] [-d <destination user>] [-m <mailbox>] [-n] [-e] [-f <envelope sender>] )
Jan 10 23:43:24 nethost postfix/qmgr[5121]: E24226FC1CA: removed

I am still getting Domain not found (in reply to RCPT TO command)) also.

[rbtux]

The error Domain Not Found (Sender Address rejected) is because there is no a or mx dns record for the domain of the sending mail address. (this can also be caused by wrong dns resolver configuration, but I'm not sure if postfix would use a 450 error code then...)

Verify the domain on the server using "host domain.co.uk".

The postfix parameter that causes that (correct) behavior is reject_unknown_sender_domain unter smtpd_*_restrictions in your /etc/postfix/main.cf

[aseques]

Quote:Jan 10 23:43:24 nethost postfix/pipe[5164]: E24226FC1CA: to=<shaun@XXXXX.co.uk>, relay=dovecot, delay=0.02, delays=0.01/0.01/0/0.01, dsn=5.3.0, status=bounced (command line usage error. Command output: Fatal: Unknown argument: -s Usage: deliver [-c <config file>] [-d <destination user>] [-m <mailbox>] [-n] [-e] [-f <envelope sender>] )
Jan 10 23:43:24 nethost postfix/qmgr[5121]: E24226FC1CA: removed

If your dovecot version does not recognize the -s parameter it must be quite old. If you are on debian, I would use nothing before lenny (at least on a new install), and at least dovecot 1.0.x

[coopa]

(01-11-2010 10:51 PM)aseques Wrote:  

Quote:Jan 10 23:43:24 nethost postfix/pipe[5164]: E24226FC1CA: to=<shaun@XXXXX.co.uk>, relay=dovecot, delay=0.02, delays=0.01/0.01/0/0.01, dsn=5.3.0, status=bounced (command line usage error. Command output: Fatal: Unknown argument: -s Usage: deliver [-c <config file>] [-d <destination user>] [-m <mailbox>] [-n] [-e] [-f <envelope sender>] )
Jan 10 23:43:24 nethost postfix/qmgr[5121]: E24226FC1CA: removed

If your dovecot version does not recognize the -s parameter it must be quite old. If you are on debian, I would use nothing before lenny (at least on a new install), and at least dovecot 1.0.x

Dovecot Version 1:1.0.15-2.3+lenny1 ISPomega 1.0.3, i've gone through all the steps in your Howto once again but same errors, whats the easiest way to back to courier should all else fail?

Thanks

Shaun

[aseques]

(01-12-2010 04:47 AM)coopa Wrote:  

(01-11-2010 10:51 PM)aseques Wrote:  

Quote:Jan 10 23:43:24 nethost postfix/pipe[5164]: E24226FC1CA: to=<shaun@XXXXX.co.uk>, relay=dovecot, delay=0.02, delays=0.01/0.01/0/0.01, dsn=5.3.0, status=bounced (command line usage error. Command output: Fatal: Unknown argument: -s Usage: deliver [-c <config file>] [-d <destination user>] [-m <mailbox>] [-n] [-e] [-f <envelope sender>] )
Jan 10 23:43:24 nethost postfix/qmgr[5121]: E24226FC1CA: removed

If your dovecot version does not recognize the -s parameter it must be quite old. If you are on debian, I would use nothing before lenny (at least on a new install), and at least dovecot 1.0.x

Dovecot Version 1:1.0.15-2.3+lenny1 ISPomega 1.0.3, i've gone through all the steps in your Howto once again but same errors, whats the easiest way to back to courier should all else fail?

Thanks

Shaun

I have installed ispcp a lot of times and never find this problem, there must be something wrong with your setup.
You could try to enable more verbosity on dovecot or start from scratch again ..
You could ignore this -s parameter too, it is basically to subscribe you to the mailboxes that are created (such as junk and so on) http://wiki.dovecot.org/LDA